nSupports two ports for CPE LAN site, one is 10/100/1000Base-T Gigabit Ethernet port and one is 10/100Base-Tx Fast Ethernet port

nSupports one EPON port for EPON site

nSupports Gigabit Ethernet-PON IEEE 802.3ah compliance

nSupports IEEE 802.3ah OAM function

nSupports IEEE 802.3ah forward error correction

nSupports 802.3z Gigabit Ethernet local-side interface

nSupports bandwidth control

nSupports up to 8 Logical Link IDs (LLID)

nSupports 64 MAC address entries per Ethernet port

nSupports 802.1p QoS

nSupports 802.1Q VLAN

nSupports 40 queues (20 upstream / 20 downstream)

nSupports 1.25M Bytes packet buffer

nAssurance of security for subscribers

nEncryption in the PON layer assures security between subscribers.

nSupports each converter module media configured and monitored ability:

nSupports port state enabled/disabled

nSupports auto-negotiation/forced mode

nSupports port speed and duplex mode

nSupports flow control enabled/disabled

nSupports wire speed packet forwarding ability as below:

n10Base : 14880 pps

n100Base: 148800 pps

n1000Base: 1413600 pps

(64Bytes up to 95% utilization)

(1518Bytes up to 97% utilization)

nSupports EPON module per port basic counters for traffic raw data monitor of fiber and TP port. as below:

nOctets transferred

nTotal Frames transferred

nUnicast Frames transferred

nBroadcast Frames transferred

nMulticast Frames transferred

nCRC-32 Errors

nUndersize Frames

nOversize Frames

nCollisions

n64 Octet Frames

n65-127 Octet Frames

n128-255 Octet Frames

n256-511 Octet Frames

n512-1023 Octet Frames

n1024-1518 Octet Frames

n1519+ Octet Frames

nFrames dropped (queue overflow)

nPause Frames

nSupports alarm log function

nSupports counters for port traffic quality monitoring function

nSupports IGMP snooping function

nSupports max packet length: 1536 bytes

nSupports firmware upgrade

nSupports device Information (S/N, MAC, Model Name,….)

nSupports per port basic LEDs for monitoring

nSupports media type, connector, wavelength and distance information

nRoHS Compliance

nLED Description

LED	Color	Function
PWR	Green	Lit when power is coming up
OLTLNK	Green	Lit when EPON port detects the signal from OLT.
LLID1-8	Green	Off when LLID is used, or else is light.
UNI1-GbE LINK/ACT	Green	Lit when GbE port is linked. Blink when GbE port is transmitting or receiving.
UNI1-GbE 10/100/1000	Green/ Yellow	Green lit when GbE port links on 1000Mbps speed. Yellow lit when GbE port links on 100Mbps speed. Off when GbE port links on 10Mbps or unlinks.
UNI1-GbE FDX	Yellow	Lit when Full-Duplex is enabled
UNI2-FE LNK/ACT	Green	Lit when FE port is linked. Blink when FE port is transmitting or receiving.
UNI2-FE 10/100	Green	Lit when FE port links on 100Mbps speed. Off when FE port links on 10Mbps or unlinks.
UNI1-FE FDX	Yellow	Lit when Full-Duplex is enabled

     nNetwork Interface

Converter TP Port	10/100Base-TX: - Auto-Negotiation - Auto-MDIX - flow control for Full-Duplex - backpressure for Half-Duplex 1000Base-T: - Auto-Negotiation Mode only - Auto-MDIX only for Auto-Negotiation - flow control for Full-Duplex only
Converter Fiber Port	ONU 1000Base-PX-U: - Link partner must be OLT 1000Base-PX-U

3   TP Cable Limitations: Cat. 5 and up to 100m

4   Fiber Cable Limitations:

 ONU 1000PX

Single-Mode Fiber 9/125mm

Single-Mode transceiver

Output:1310nm 10 / 20Km 

Note: Upstream=1310nm, Downstream=1490nm is the wavelength of EPON fiber transceiver

nStandards : IEEE802.3 10Base-T,

　　　　　 IEEE802.3u 100Base-TX,

　　　　　 IEEE802.3z/ab 1000Base-T,

　　　　　 IEEE802.3ah 1000Base-PX-U (EPON)

nUTP Cable: Cat. 5 cable and up to 100m
nFiber Cable: 1000Base-PX-U: 8.3/125, 8.7/125, 9/125 or 10/125mm Single-Mode

nLED Indicators:
PWR,

EPON LLID 1-8, OLTLNK,
UNI1-GbE  LNK/ACT, 10/100/1000, FDX

UNI2-FE  LNK/ACT, 10/100, FDX

Data Transfer Rate:
Upstream: Max. Up to 950 Mbps

Downstream: Max. Up to 970 Mbps

TP Interface (UNI1-GbE and UNI2-FE): 

10/100Base-TX:

NWay auto-negotiation

Auto-MDIX

Full/Half-Duplex

1000Base-T:                      

NWay auto-negotiation or force

Auto-MDIX(only for Auto mode)

Full-Duplex only

Fiber Interface  :

1000Base-PX-U (EPON):

Connector: SC/BiDi

Max. Cable Length: 20Km for 9/125u

Upstream (ONU TX) Wavelength: 1310nm

Downstream (ONU RX) Wavelength: 1490nm

Power Requirement :  0.8A up @+5VDC

Power Consumption        :  3.5 W

Ambient Temperature :  0° to 50°C

Humidity                :  5% to 90%

Dimensions :  26.8(H) ´ 139(W) ´ 101.5(D) mm

nPacking Information

Carton Dimensions (mm)	pcs/Carton	N.W (KG)	G.W (KG)
523x489x267	12	10.8	11.8

Ordering Information
nModel

ONU-E100BS3.S10	2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm
ONU-E100BS3.S20	2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm