Ruby Tech Inc.

Your Location: Home > Products > PoE Media Converter > U

PSGC-110H
10/100/1000Base-T to 1000Base-X PoE PSE+GbE Media Converter

PSGC-110H is designed a 10/100/1000Base-T to 1000Based-SX/LX (SC/LC) GbE media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3at draft(Max. PoE output: 30W) and backward compatible with IEEE802.3af (Max. PoE output: 15.4W) Power Over Ethernet standard, this AC powered PoE media converter is a Power Sourcing Equipment Plus (PSE+: Means PoE High Power Output Device) which combines data received over a TP link with 56VDC power, providing power to IEEE802.3af or IEEE802.3at powered device (PD) over the existing CAT5 UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSGC-110H, both end devices can be notified of a loss of fiber link.

Key Features

■IEEE802.3at draft and IEEE802.3af PoE (Power over Ethernet) PSE compatible

■Internal AC power supply

■Over-current protection

■Under-current detection

■Minimum load sensing

■Fault Protection Input

■PSE MDI power enable/disable

■LFP (Link Fault Pass-through) and FEF (Far End Fault)

■Supports one 10/100/1000Base-T Gigabit Ethernet UTP port and one 1000Base-SX / LX (SC/LC) Gigabit Ethernet Fiber port

■Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports

■Supports comprehensive types of fiber with different distances and connections, including SC/Bidi/LC and so on

■Supports auto mode on the TP port

■DIP switch to set configurations

■DIP 1: Cut through/Normal

■DIP 2: LFP/LFP DIS

■DIP 3: PoE/PoE DIS

■Supports jumbo frame (Normal Mode: 2KB, Cut-Through Mode: 9KB)

■PSE RJ-45 Pin-out Alternatives A/B Auto detection(Both Midspan and Endpoint)

■RoHS Compliance

Technical Specification

■ Standards
■IEEE802.3 10Base-T
■IEEE802.3u 100ase-TX

■IEEE802.3z/ab 1000Base-T

■1000Base-SX/LX
■IEEE802.3x full-duplex flow control

■Cable
   ■UTP：Cat. 5 cable and up to 100m
   ■Fiber：
   ■1000SX：50/125, 62.5/125 multi-mode
   ■1000LX：8.3/125, 8.7/125, 9/125 or 10/125μm single-mode

■Data Transfer Rate：2000Mbps/full-duplex

■ Network Interface

Category

Connector

Transmission

Max. Cable
Length

Wavelength

10/100Baswe-TX

RJ-45

Full/Half

Duplex

100M

1000Base-T

RJ-45

Full
Duplex

100M

1000Base-SX (M-M)

SC/LC

Full
Duplex

0.55Km
50/125μm

850nm

1000Base-LX (S-M)

SC/LC

Full
Duplex

10/30/50Km
9/125μm

1310nm

or

1550nm

■ LED Indicator

LED

Color

Function

PWR

Green

Lit when power is coming up

FX LNK/ACT

Green

Lit when fiber connection is good

Blinks when fiber data is present

TP LNK/ACT

Green

Lit when TP connection is good

Blinks when TP data is present

10/100/1000

Mbps

Green/ Amber

Lit Green when TP link on 1000Mbps

Lit Amber when TP link on 100Mbps

Off when TP link on 10Mbps

PoE1

Green

Lit when RJ-45 (1,2),(3,6) pairs detect PD

PoE2

Green

Lit when RJ-45 (4,5),(7,8) pairs detect PD

■Power
■Requirement：100 – 240 VAC, 47 –63 Hz
■Consumption：Max. up to 30Watts

■Ambient Temperature：0 ~ 50°C

■Humidity：5 ~ 90％

■Dimensions：40 (H) x 158 (W) x 133 (D) mm

■Certification：FCC Part 15 Class A,CE Mark

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

530x512x345mm

14

18

19

Packing Information

■Ordering Information
■Model (with external power adapter)

PSGC-110HSC

10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM SC

PSGC-110HSC.S10

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 10km

PSGC-110HSC.S30

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 30km

PSGC-110HSC.S50

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 50km

PSGC-110HBS5.S20

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1550nm

PSGC-110HBS3.S20

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1310nm

PSGC-110HLC

10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM LC

PSGC-110HLC.S10

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 10km

PSGC-110HLC.S30

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 30km

PSGC-110HLC.S50

10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 50km

Links
See also: PDF Data sheet