Your Location: Home > Products > >
16-Port GbE Managed Fiber Switch

FGS-2616X series L2+ Managed Switch are next-generation Fiber Switch offering full suite of L2 features and additional 10GbE uplink connections, including advanced L3 features such as Static Route that delivers the better cost performance and lower total cost of ownership in Enterprise networks or backbone via fibber or copper connections.

FGS-2616X delivers 12 GbE SFP ports, 2 RJ45 ports, 2 10GbE SFP+ ports and RJ45 Console port, including FGS-2616X, FGS-2616XA and FGS-2616XD with built-in AC and DC dual power supply, pure AC or DC power supply. FGS-2616X provides front access to all data and management ports, and a compact form factor that facilitates desktop, wall-mount, or rack-mount installations.

FGS-2616X series are ideal to deliver management simplicity, better user experience, and lowest total cost of ownership.

  Key Features

nL2+ Managed features provide easier manageability, robust security and QoS.

nAC/DC Dual Power Supply

nDHCP Server

nIPv4/IPv6 L3 static route

nIEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet



nFeature-rich Ethernet Switch for Enterprise-class

The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard, Access Control List guard your network from unauthorized access.

It helps users to build on the market-leading price/performance with L2+ Managed GbE fiber switch, and provide secure, reliable and ease of use for enterprise and SMB deployments.


nLower Total Cost of Ownership (TCO) with Energy-efficient Design

It is designed to help customers to reduce power consumption and lower the TCO by Energy Efficient Ethernet (IEEE 802.3az) features. It can be used for customers to build a green Ethernet networking environment.


nAC/DC Dual Power Supply

Power failover when power supplies are connected to different circuits. Reduce network operating risk.


  Technical Specification

Port Configuration

Total Ports

SFP (100M/1G)

Uplinks (100M/1G/10G)




2 SFP+ (1G/10G)

2 RJ45 (100M/1G)



Hardware Performance

Forwarding Capacity

Switching Capacity

Mac Table

Jumbo Frames

50.592 Mpps

68 Gbps

32 K

10056 Bytes


Environmental Range

Operating Temperature

Storage Temperature








-4 to 140

-20 to 60

-40 to 185

-40 to 85

< 10000

< 3000


Dimension, Weights, Humidity

Dimension (WxHxD)


Operating Humidity





280 x 44 x 134

11 x 1.73 x 5.28



10% to 90%  non-condensing


Voltage and Frequency

Model Name

AC Input Voltage

DC Input Voltage



100-240 VAC, 50-60 Hz

24/48 VDC


100-240 VAC, 50-60 Hz





24/48 VDC



Electromagnetic Emissions (EMC)

CE, FCC Part 15 Class A

Software Features

Layer 2 Switching

Spanning Tree Protocol (STP)

nStandard Spanning Tree 802.1d

nRapid Spanning Tree (RSTP) 802.1w

nMultiple Spanning Tree (MSTP) 802.1s


Link Aggregation Control Protocol (LACP) IEEE 802.3ad

nUp to 8 groups

nUp to 4 ports per group


Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)

nPort-based VLAN

n802.1Q tag-based VLAN

nMAC-based VLAN

nManagement VLAN

nPrivate VLAN Edge (PVE)

nQ-in-Q (double tag) VLAN

nVoice VLAN

nGARP VLAN Registration Protocol (GVRP)

DHCP Relay

Relay of DHCP traffic to DHCP server in different VLAN.

Works with DHCP Option 82

IGMP v1/v2/v3 Snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups

IGMP Querier

IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router

IGMP Proxy

IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router

MLD v1/v2 Snooping

Delivers IPv6 multicast packets only to the required receivers

Layer 3 Switching

IPv4 Static Routing

IPv4 Unicast: Static routing

IPv6 Static Routing

IPv6 Unicast: Static routing


Secure Shell (SSH)

SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported

Secure Sockets Layer (SSL)

SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch

IEEE 802.1X

nIEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions

nSupports IGMP-RADIUS based 802.1X

nDynamic VLAN assignment

Layer 2 Isolation Private VLAN Edge

PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks

Port Security

Locks MAC addresses to ports, and limits the number of learned MAC address

IP Source Guard

Prevents illegal IP address from accessing to specific port in the switch


Supports RADIUS and TACACS+ authentication. Switch as a client

Storm Control

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

DHCP Snooping

A feature acts as a firewall between untrusted hosts and trusted DHCP servers


Supports up to 512 entries. Drop or rate limitation based on:

nSource and destination MAC, VLAN ID or IP address, protocol, port,

nDifferentiated services code point (DSCP) / IP precedence

nTCP/ UDP source and destination ports

n802.1p priority

nEthernet type

nInternet Control Message Protocol (ICMP) packets

nTCP flag

Quality of Service

Hardware Queue

Supports 8 hardware queues


nStrict priority and weighted round-robin (WRR)

nQueue assignment based on DSCP and class of service


nPort based

n802.1p VLAN priority based

nIPv4/IPv6 precedence / DSCP based

nDifferentiated Services (DiffServ)

nClassification and re-marking ACLs

Rate Limiting

nIngress policer

nEgress shaping and rate control

nPer port


DHCP Server

Support DHCP server to assign IP to DHCP clients

Zero Touch Upgrade

Upgrade single switch automatically when you get notification

Remote Monitoring (RMON)

Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis

Port Mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch�€ Ports) ports can be mirrored to single destination port. A single session is supported. 


The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play


The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats

IEEE 802.1ab (LLDP)

nUsed by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network

nSupport LLDP-MED extensions

Web GUI Interface

Built-in switch configuration utility for browser-based device configuration


For users to configure/manage switches in command line modes

Dual Image

Independent primary and secondary images for backup while upgrading


SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)

Firmware Upgrade

nWeb browser upgrade (HTTP/ HTTPs) and TFTP

nUpgrade through console port as well


Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched

Other Management


nDHCP Client/ DHCPv6 Client

nCable Diagnostics



nTelnet Client

nIPv6 Management



See also: PDF Data sheet

 Home | Ruby | News | Products | Solution | Support | Partner | Contact