你的位置: 回到首頁 > 系列產品 > >
FGS-2728KX
28-P GbE Managed Switch


FGS-2728KX L2+ Managed Switch is a next-generation Carrier Ethernet Switch offering full suite of L2 features, L3 Static Route and Carrier Ethernet features such as OAM, CFM and 1588v2 PTP, etc, which delivers better cost performance and lower total cost of ownership in Enterprise networks via fiber connections.

FGS-2728KX delivers 20 GbE SFP ports, 4 Combo GbE RJ45/SFP ports, 4 GbE/10G SFP+ ports, RJ45 Console port and OOB Management port with built-in AC and DC dual power supply. FGS-2728KX provides front access to all data and management ports that facilitates desktop or rack-mount installations for Carrier/Telecom providers.

FGS-2728KX is ideal for environments that require advanced features for granular control which is a must for easy network configuration and management where you need for a successful installation for high-bandwidth VoIP, Gigabit-to-the-Desktop deployments, converged voice and data networks in Carrier Ethernet Applications.


  Key Features

nCarrier Ethernet features provide easier manageability, security, QoS

nIEEE 1588v2 PTP (BC/TC)

nIEEE 802.3ah OAM

nIEEE 802.1ag CFM (ITU-T Y.1731 Performance monitoring)

nITU-T G.8031 Ethernet Linear Protection Switching (EPS)

nITU-T G.8032 Ethernet Ring Protection Switching (ERPS)

nDHCP Server

nIPv4/IPv6 L3 static route

nIEEE 802.3az EEE for green Ethernet application

 

Benefits

nFeature-rich Carrier Ethernet Switch for Metro Ethernet

The switch delivers advanced functionality in Carrier Ethernet switch including IEEE 1588v2, OAM, CFM, etc. It also enhanced security features such as IP source guard, Access Control List guard your network from unwanted or unauthorized access.

It helps users to build on the market-leading price/performance with Carrier Ethernet switch, and provide secure, reliable for metro Ethernet deployments.

 

nExceptional Precision with IEEE 1588v2 (TC, BC)

The switch performs IEEE1588v2, including transparent and boundary clock capabilities, implementations in hardware, so there is no performance penalty on packet processing.

The hardware architecture ensures low latency and high time accuracy – which is critical for delay-sensitive financial and mobile applications.

 

nSuperior reliability through OAM and CFM for Service Assurance

Service assurance is provided through a rich feature set of operations, administration, and maintenance (OAM) functionalities. It can simplify and facilitate the management of Carrier network, resulting in diminishing operational costs.

The Ethernet access device also offers standards-based fault and performance management in adherence with 1731 PM and 802.1ag connectivity fault management (CFM) standards. It comes with Y.1564 that include both generation and reflection of traffic.

These features contribute to significant reduction in operational expenditures and allows for troubleshooting without expensive truck rolls.

 

nLowing Total Cost of Ownership (TCO) with Energy-efficient Design

The switch is designed to help companies to save power needs and reduce TCO by Energy Efficient Ethernet (IEEE 802.3az). It can be used for customers to build a green Ethernet networking environment.

 

  Technical Specification



Port Configuration

Total Ports

SFP (100M/1G)

Uplinks (100M/1G/10G)

Console

MGMT

28

20

4 SFP+

4 RJ45/SFP Combo

RJ45

RJ45

 

Hardware Performance

Forwarding Capacity

Switching Capacity

Mac Table

Jumbo Frames

95.232 Mpps

128 Gbps

32 K

10056 Bytes

 

Environmental Range

Operating Temperature

Storage Temperature

Altitude

Fahrenheit

Centigrade

Fahrenheit

Centigrade

Feet

Meters

-4 to 140

-20 to 60

-40 to 185

-40 to 85

< 10000

< 3000

 

Dimension, Weights, Humidity

Dimension (WxHxD)

Weight

Operating Humidity

Millimeter

Inches

Kilograms

Pounds

442 x 44 x 211

17.4 x 1.73 x 8.31

3.1

6.8

10% to 90%  non-condensing

 

Voltage and Frequency

Input Voltage and Frequency

AC Voltage

100-240 VAC 

AC Frequency

50-60 Hz

DC Voltage

24-72 VDC

 

Certification

Electromagnetic Emissions (EMC)

CE, FCC Part 15 Class A

 


Software Features

Layer 2 Switching

Spanning Tree Protocol (STP)

nStandard Spanning Tree 802.1d

nRapid Spanning Tree (RSTP) 802.1w

nMultiple Spanning Tree (MSTP) 802.1s

Trunking

Link Aggregation Control Protocol (LACP) IEEE 802.3ad

nUp to 14 groups

nUp to 4 ports per group

VLAN

Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)

nPort-based VLAN

n802.1Q tag-based VLAN

nMAC-based VLAN

nManagement VLAN

nPrivate VLAN Edge (PVE)

nQ-in-Q (double tag) VLAN

nVoice VLAN

nGARP VLAN Registration Protocol (GVRP)

DHCP Relay

nRelay of DHCP traffic to DHCP server in different VLAN.

nWorks with DHCP Option 82

IGMP v1/v2/v3 Snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups

IGMP Querier

IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router

IGMP Proxy

IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router

MLD v1/v2 Snooping

Delivers IPv6 multicast packets only to the required receivers

Layer 3 Switching

IPv4 Static Routing

IPv4 Unicast: Static routing

IPv6 Static Routing

IPv6 Unicast: Static routing

Security 

Secure Shell (SSH)

SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported

Secure Sockets Layer (SSL)

SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch

IEEE 802.1X

nIEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions

nSupports IGMP-RADIUS based 802.1X

nDynamic VLAN assignment

Layer 2 Isolation Private VLAN Edge

PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks

Security 

Port Security

Locks MAC addresses to ports, and limits the number of learned MAC address

IP Source Guard

Prevents illegal IP address from accessing to specific port in the switch

RADIUS/ TACACS+

Supports RADIUS and TACACS+ authentication. Switch as a client

Storm Control

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

DHCP Snooping

A feature acts as a firewall between untrusted hosts and trusted DHCP servers

ACLs

Supports up to 512 entries. Drop or rate limitation based on:

nSource and destination MAC, VLAN ID or IP address, protocol, port,

nDifferentiated services code point (DSCP) / IP precedence

nTCP/ UDP source and destination ports

n802.1p priority

nEthernet type

nInternet Control Message Protocol (ICMP) packets

nTCP flag

Quality of Service

Hardware Queue

Supports 8 hardware queues

Scheduling

nStrict priority and weighted round-robin (WRR)

nQueue assignment based on DSCP and class of service

Classification

nPort based

n802.1p VLAN priority based

nIPv4/IPv6 precedence / DSCP based

nDifferentiated Services (DiffServ)

nClassification and re-marking ACLs

Rate Limiting

nIngress policer

nEgress shaping and rate control

nPer port

Management

DHCP Server

Support DHCP server to assign IP to DHCP clients

Zero Touch Upgrade

Upgrade single switch automatically when you get notification

Remote Monitoring (RMON)

Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis

Port Mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. 

UPnP

The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play

s-Flow

The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats

Management

IEEE 802.1ab (LLDP)

nUsed by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network

nSupport LLDP-MED extensions

Web GUI Interface

Built-in switch configuration utility for browser-based device configuration

CLI

For users to configure/manage switches in command line modes

Dual Image

Independent primary and secondary images for backup while upgrading

SNMP

SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)

Firmware Upgrade

nWeb browser upgrade (HTTP/ HTTPs) and TFTP

nUpgrade through console port as well

NTP

Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched

Other Management

nHTTP/HTTPs; SSH

nDHCP Client/ DHCPv6 Client

nCable Diagnostics

nPing

nSyslog

nTelnet Client

nIPv6 Management

Ethernet OAM

IEEE 802.3ah Link OAM

Supports IEEE 802.3ah Ethernet OAM (Operations, Administration & Management)

IEEE 802.1ag & ITU-T Y.1731 Flow OAM

Supports IEEE 802.1ag Ethernet CFM (Connectivity Fault Management)

Supports ITU-T Y.1731 Performance Monitoring

Loop Protection

ITU-T G.8031

Supports ITU-T G.8031 Ethernet Linear Protection

ITU-T G.8032

Supports ITU-T G.8032 Ethernet Ring Protection Switching



  搜尋
  連結

See also: PDF Data sheet
 回到首頁 | 關於德勝 | 最新消息 | 系列產品 | 解決方案 | 技術支援 | 合作夥伴 | 聯絡我們