EM-C107C
Product Overview
EM-C107C complies with IEEE802.3/IEEE802.3u 10/100Mbps Fast Ethernet that supports two types of media, 10/100Base-TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through) feature enhances the TP-Fiber Link integrity and conformity.
With modular slide-in design, it is flexible to install in the 19″ converter rack (up to 16 units) for use at a central wiring closet. The converter racks CR-16xx and CP-100/200 family are available for housing the converter modules.
Key Features
- 10/100Base-TX to 100Base-FX Fast Ethernet converter module
- Supports link fault pass through (LFP)
- RoHS Compliance
Product Specification
| MODEL NAME | EM-C107C |
|---|---|
| Product Description | 10/100Base-TX to 100Base-FX Converter Module |
Standards
IEEE 802.3u
10/100Base-TX
100Base-FX
Cable
UTP Cable : Cat. 5 cable and up to 100M
Fiber (M-M) : 50/125,62.5/125,100/140μm (Up to 2Km)
Fiber (S-M) : 8.3/125,8.7/125,9/125,100/125μm (Up to 120km)
Data Transfer Rate
100Mbps : 148,800 PPS
10Mbps : 14,880 PPS
LED Description
| LED | Funciton |
|---|---|
| PWR | Lit when +5V power is coming up |
| TP LNK | Lit when TP connection is good Blinks when TP data is present |
| TP 100 | Lit when TP speed is 100Mbps Off when TP speed is 10Mbps |
| FX LNK | Lit when fiber connection is good Blinks when fiber data is present |
| FX 100 | Lit for fiber 100Mbps operation |
| FDX/COL | Lit when full-duplex mode is active Off when half-duplex is active Blinks when collision is present |
Hardware Spec
| Feature | Detailed Description |
|---|---|
| Voltage | 1A@ + 5VDC |
| Ambient Temperature | 0°C ~ 50°C |
| Humidity | 5% ~ 90% |
| Dimensions | 125(L) x 64(H)mm |
| Emission | FCC Part 15 Class A, CE Mark |
Note：For connecting this device to Router, Bridge or Switch, please Refer to the corresponding device’s Technical Manua
Download
Product
Datasheet
- + Overview
-
Product Overview
EM-C107C complies with IEEE802.3/IEEE802.3u 10/100Mbps Fast Ethernet that supports two types of media, 10/100Base-TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through) feature enhances the TP-Fiber Link integrity and conformity.
With modular slide-in design, it is flexible to install in the 19″ converter rack (up to 16 units) for use at a central wiring closet. The converter racks CR-16xx and CP-100/200 family are available for housing the converter modules.
Key Features
- 10/100Base-TX to 100Base-FX Fast Ethernet converter module
- Supports link fault pass through (LFP)
- RoHS Compliance
- + Specification
-
Product Specification
MODEL NAME EM-C107C Product Description 10/100Base-TX to 100Base-FX Converter Module Standards
IEEE 802.3u
10/100Base-TX
100Base-FX
Cable
UTP Cable : Cat. 5 cable and up to 100M
Fiber (M-M) : 50/125,62.5/125,100/140μm (Up to 2Km)
Fiber (S-M) : 8.3/125,8.7/125,9/125,100/125μm (Up to 120km)
Data Transfer Rate
100Mbps : 148,800 PPS
10Mbps : 14,880 PPS
LED Description
LED Funciton PWR Lit when +5V power is coming up TP LNK Lit when TP connection is good Blinks when TP data is present
TP 100 Lit when TP speed is 100Mbps
Off when TP speed is 10MbpsFX LNK Lit when fiber connection is good Blinks when fiber data is present
FX 100 Lit for fiber 100Mbps operation FDX/COL Lit when full-duplex mode is active Off when half-duplex is active
Blinks when collision is present
Hardware Spec
Feature Detailed Description Voltage 1A@ + 5VDC Ambient Temperature 0°C ~ 50°C Humidity 5% ~ 90% Dimensions 125(L) x 64(H)mm Emission FCC Part 15 Class A, CE Mark Note：For connecting this device to Router, Bridge or Switch, please Refer to the corresponding device’s Technical Manua
- + Download
-
Download
Product
Datasheet