CR-3816

[cq_vc_hotspot image=”9392″ position=”” iconbackground=”rgba(155,155,155,0.8)” circlecolor=”#ffffff” opacity=”0.8″][/cq_vc_hotspot]
[ult_tab_element tab_style=”Style_4″ container_width=”1080″ disp_icon=”Disables” main_heading_font_family=”font_family:Roboto|font_call:Roboto|variant:300″ title_font_style=”font-weight:300;” title_font_size=”desktop:24px;”][single_tab title=”Overview” tab_id=”9207d3c6-d9a5-3″]

Product Overview

The manageable box is a 19-inch Media Converter Chassis with cabinet height 3U. It is designed to accommodate 16 slots of various type of fiber media converter module at a central location for multiple segments cross connection and network management. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection. The network management supports Web UI via browser, CLI via local console, Telnet interface and SNMPv2c. Supports IEEE 802.3ah OAM function for CO and CPE site “Remote Failure Indication”, “Remote Loopback” and “Link Monitoring”. Supports “Port Configuration” and “Bandwidth Configuration”. Models equipped with DC-48V power unit are also available for Telecom applications.

Key Features

    1. Supports standard 19″ 3U high rack-mount chassis with 16 slots for
      converter modules
    2. 19-inch rack mount

—The concentrator unit will fit in both Electronic Industries Association (EIA) standard compliant racks.

  • Supports 3 fans for chassis heat radiating
  • Operating temp range 0 ~ 40℃
  • Supports chassis temperature detection with F/C both degree
  • Supports FAN rotation rate (RPM) detection
  • Supports chassis ID (CID) for chassis location indication
  • Built-in management CPU module:

 

—Supports DB-9 RS232 interface for console

—Supports two Ethernet ports in management network

  • Management Board LED display: PowerA/B, UTP port: Act/Link, CPU
    Run
  • Supports hot-swappable and upgradeable management CPU module
  • Supports hot-swappable converter modules
  • Supports hot-swappable and loading-shared redundant power units,each can be DC or AC. Independent power input for each power modules
  • Supports Real-Time Clock (RTC)
  • Power monitor (absent/present, ON/OFF, DC/AC), fans monitor and
    temperature monitor
  • Power supply: Hot-swap redundant, high reliability/safety
  • Supports CO/CPE conversion port configuration for port state
  • Speed/Duplex, Flow Control and Bandwidth setting
  • Comply with RoHS Requirement
  • Provides a Gigabit Ethernet PON (Passive Optical Network),converting 10/100/1000 Mbps Ethernet into optical signals with an optical coupler for point-to-multipoint networks. The EPON OLT converter module for the center unit can be selected to provide datacom service for distances of up to 20 km. The same subscriber unit EPON ONU converter is used for remote CPE site, whether 20 km type.
  • One OLT handles up to 32 subscribers per fiber

 

—Implements full duplex with single SM fiber links, along with an optical coupler for 32 branches, making it possible to handle up to 32 subscribers per single optical fiber.

  • One chassis supports up to 512 subscribers

 

—The center unit (rear access type) uses high-density packing to fit up to 512 subscribers into a 3U case height (132 mm), saving your valuable rack space.

  • Independent channel configuration

 

—Additional EPON converter module can be added as needed to economically handle subscriber growth. In addition, maintenance is possible in channel units, making it possible to respond to a fault on one channel without affecting the others.

[/single_tab][single_tab title=”Specification” tab_id=”524772ed-527d-4″]

Product Specification

MODEL NAME CR-3816
Product Description 16-Slot EPON Converter Chassis

Model Description

16-slot managed EPON converter chassis for modular EPON Media converter with redundant AC Power or redundant -48VDC Power

Converter Chassis Model Power Supply
Configuration		 DC Output Slots
CR-3816RAC Two AC 100 or 240V Power
Module w/ Redundancy		 400W @+12V 16
CR-3816AC One AC 100 or 240V Power
Module wo/ Redundancy		 200W @+12V 16
CR-3816RDC Two DC -48V Power
Module w/ Redundancy		 400W @+12V 16
CR-3816DC One DC -48V Power
Module wo/ Redundancy		 200W @+12V 16
CR-3816RADC One AC 100 or 240V and
One DC –48V Power
Module w/ Redundancy		 400W @+12V 16

 

Power Model Power Supply
Configuration		 DC Output
CPS-AC200W Redundant AC 100 or 240V 200W @+12V
CPS-DC200W Redundant DC -48V 200W @+12V

 

OLT Converter Model Description
OLT-E100BS4.S20 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20Km, 1490nm

Note:
-The OLT modules are ordered by model number and with a separate package

-The slide-in modules and converter chassis should be supplied only by the same manufacturer/vender. Both converter and chassis rack are built to match each other at dimensions, power bus/receptacle and power safety, etc.

-OLT-E100BS4.S20 must be installed in pairs, i.e.,OLT-E100BS4.S20 at one end and ONU-E100BS3.S10 or ONU-E100BS3.S20 at the other one

Capacity:

16 Slots for modular Media converter

Management

SNMP and web-base via in-band LAN port or local serial CLI

Power supply

Hot-swap redundant, high reliability/safety

Redundant Power Requirement

AC Power Input: Telecom DC Input:
Voltage: 100 or 240VAC Voltage: -48VDC
Frequency: 50~60Hz NA NA
Dissipation: 200W maximum Dissipation: 200W Maximum

 

Feature Detailed Description
Ambient Temperature 0° to 40°C
Humidity 5% to 90%
Dimensions 132(H) x 440(W) x 336.5(L) mm
Weight 8.52Kg (without power
9.54 kg (includes 1 x AC power
10.56 Kg (includes 2 x AC power
9.57 kg (includes 1 x DC power
10.62 kg (includes 2 x DC power
10.59 kg (includes 1 x AC power
Safety Comply with FCC Part 15 Class A & CE Mark Approval

Packing Information

Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
500x447x300 1 11.6 12.6
[/single_tab][single_tab title=”Ordering Information” tab_id=”1460443127082-2-3″]

Model

Model Dscription
CR-3816RAC 16-Slot EPON Converter Chassis with Dual AC Input Redundant Power Supply
CR-3816RDC 16-Slot EPON Converter Chassis with Dual DC Input Redundant Power Supply
CR-3816RADC 16-Slot EPON Converter Chassis with AC+DC Input Redundant Power Supply
CR-3816AC 16-Slot EPON Converter Chassis with Single AC Input Redundant Power Supply
CR-3816DC 16-Slot EPON Converter Chassis with Single DC Input Redundant Power Supply
OLT-E100BS4.S20 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20km, 1490nm
ONU-E100BS3.S10 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm
ONU-E100BS3.S20 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm

Optional Accessory

Model Description
CPS-AC200W AC-DC Power Module 200W/12V, 100 or 240VAC, 50/60Hz
CPS-DC200W DC-DC Power Module 200W/12V, -48VDC
[/single_tab][single_tab title=”Download” tab_id=”1464749651904-3-0″]

Download

[TS_VCSC_Icon_Button button_type=”circle” button_circle=”ts-button-circle ts-button-default glow” button_text=”” button_font=”40″ icon=”ts-awesome-file-o” link=”url:..%2Fdownload%2Fpdf%2FCR-3816_20130626.pdf||”]

PDF Data sheet

[/single_tab][/ult_tab_element]