FAQs - Rubytech https://www.rubytech.com.tw/rubytech Professional ODM Partner to Customize Networking products Thu, 28 Jan 2016 10:35:08 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.rubytech.com.tw/rubytech/wp-content/uploads/2017/11/logo.png FAQs - Rubytech https://www.rubytech.com.tw/rubytech 32 32 Which UTP pairs are used for delivers power on ECO layer2 PoE managed series switches and web PoE series switches ? https://www.rubytech.com.tw/rubytech/faq/which-utp-pairs-are-used-for-delivers-power-on-eco-layer2-poe-managed-series-switches-and-web-poe-series-switches/?utm_source=rss&utm_medium=rss&utm_campaign=which-utp-pairs-are-used-for-delivers-power-on-eco-layer2-poe-managed-series-switches-and-web-poe-series-switches Thu, 28 Jan 2016 10:35:08 +0000 /rubytech/?post_type=faq&p=4191 pins 1 and 2 (pair #2 inT568B ) and pins 3 and 6 (pair #3 in T568B)

The post Which UTP pairs are used for delivers power on ECO layer2 PoE managed series switches and web PoE series switches ? first appeared on Rubytech.

]]> pins 1 and 2 (pair #2 inT568B ) and pins 3 and 6 (pair #3 in T568B)

The post Which UTP pairs are used for delivers power on ECO layer2 PoE managed series switches and web PoE series switches ? first appeared on Rubytech.

]]> What kinds of UTP category agree with use on the switch ? https://www.rubytech.com.tw/rubytech/faq/what-kinds-of-utp-category-agree-with-use-on-the-switch/?utm_source=rss&utm_medium=rss&utm_campaign=what-kinds-of-utp-category-agree-with-use-on-the-switch Thu, 28 Jan 2016 10:32:30 +0000 /rubytech/?post_type=faq&p=4188 Category 5.category 5e .category 6

The post What kinds of UTP category agree with use on the switch ? first appeared on Rubytech.

]]> Category 5.category 5e .category 6

The post What kinds of UTP category agree with use on the switch ? first appeared on Rubytech.

]]> How to do factory default on ECO layer2 managed series switches and web series switches ? https://www.rubytech.com.tw/rubytech/faq/how-to-do-factory-default-on-eco-layer2-managed-series-switches-and-web-series-switches/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-do-factory-default-on-eco-layer2-managed-series-switches-and-web-series-switches Thu, 28 Jan 2016 10:31:53 +0000 /rubytech/?post_type=faq&p=4185 Stab /Push reset button until the front LED all flash, then release the button.

The post How to do factory default on ECO layer2 managed series switches and web series switches ? first appeared on Rubytech.

]]> Stab /Push reset button until the front LED all flash, then release the button.

The post How to do factory default on ECO layer2 managed series switches and web series switches ? first appeared on Rubytech.

]]> How to import your config file into the switch by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-import-your-config-file-into-the-switch-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-import-your-config-file-into-the-switch-by-console-port Thu, 28 Jan 2016 10:31:09 +0000 /rubytech/?post_type=faq&p=4182 Install tftp client tool at your manage PC and designate directory is necessary . Type command on CLI. Switch# config-file Switch(config-file)# import 192.168.1.135 config.xml Saved 63007 bytes to server

The post How to import your config file into the switch by console port ? first appeared on Rubytech.

]]>
  • Install tftp client tool at your manage PC and designate directory is necessary .
  • Type command on CLI.

    • Switch# config-file

    Switch(config-file)# import 192.168.1.135 config.xml

    Saved 63007 bytes to server

    The post How to import your config file into the switch by console port ? first appeared on Rubytech.

    ]]>         How to export your configuration to a backup file by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-export-your-configuration-to-a-backup-file-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-export-your-configuration-to-a-backup-file-by-console-port Thu, 28 Jan 2016 10:30:33 +0000 /rubytech/?post_type=faq&p=4179 Install tftp client tool at your manage PC and designate directory is necessary . Type command on CLI. Switch# config-file Switch(config-file)# export 192.168.1.135 config.xml Saved 63007 bytes to server

    The post How to export your configuration to a backup file by console port ? first appeared on Rubytech.

    ]]>
  • Install tftp client tool at your manage PC and designate directory is necessary .
  • Type command on CLI.

    • Switch# config-file

    Switch(config-file)# export 192.168.1.135 config.xml

    Saved 63007 bytes to server

    The post How to export your configuration to a backup file by console port ? first appeared on Rubytech.

    ]]>         How to save configuration in backup area of flash by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-save-configuration-in-backup-area-of-flash-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-save-configuration-in-backup-area-of-flash-by-console-port Thu, 28 Jan 2016 10:29:53 +0000 /rubytech/?post_type=faq&p=4176 Type command on CLI. Switch# save user         <enter>

    The post How to save configuration in backup area of flash by console port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# save user         <enter>

    The post How to save configuration in backup area of flash by console port ? first appeared on Rubytech.

    ]]>         How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? https://www.rubytech.com.tw/rubytech/faq/how-to-keep-current-configuration-in-flash-by-console-port-after-the-switch-reboot-the-switch-will-reload-this-configuration/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-keep-current-configuration-in-flash-by-console-port-after-the-switch-reboot-the-switch-will-reload-this-configuration Thu, 28 Jan 2016 10:29:15 +0000 /rubytech/?post_type=faq&p=4173 Type command on CLI. Switch# save start        <enter>

    The post How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# save start        <enter>

    The post How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? first appeared on Rubytech.

    ]]>         How do I configure DHCP client on the switch by console port ? https://www.rubytech.com.tw/rubytech/faq/how-do-i-configure-dhcp-client-on-the-switch-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-do-i-configure-dhcp-client-on-the-switch-by-console-port Thu, 28 Jan 2016 10:28:39 +0000 /rubytech/?post_type=faq&p=4170 Type command on CLI. Switch# ip        <enter> Switch(ip)# dhcp enable        <enter> Switch(ip)# show Configured      Current ————— ————— DHCP Client          : Enabled IP Address           : 192.168.1.10    192.168.1.220 IP Mask              : 255.255.255.0   255.255.255.0 IP Gateway           : 192.168.1.252   192.168.1.123 VLAN ID              : 1               1 DNS Server           : 0.0.0.0         192.168.1.1 Proxy                : Disabled

    The post How do I configure DHCP client on the switch by console port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# ip        <enter>

    Switch(ip)# dhcp enable        <enter>

    Switch(ip)# show

    Configured      Current

    ————— —————

    DHCP Client          : Enabled

    IP Address           : 192.168.1.10    192.168.1.220

    IP Mask              : 255.255.255.0   255.255.255.0

    IP Gateway           : 192.168.1.252   192.168.1.123

    VLAN ID              : 1               1

    DNS Server           : 0.0.0.0         192.168.1.1

    Proxy                : Disabled

    The post How do I configure DHCP client on the switch by console port ? first appeared on Rubytech.

    ]]>         How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? https://www.rubytech.com.tw/rubytech/faq/how-do-i-reconfigure-ip-address-subnet-mask-and-gateway-thecn-check-them-by-consoel-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-do-i-reconfigure-ip-address-subnet-mask-and-gateway-thecn-check-them-by-consoel-port Thu, 28 Jan 2016 10:27:41 +0000 /rubytech/?post_type=faq&p=4167 Type command on CLI. Switch# ip        <enter> Switch(ip)#set 192.168.1.10 255.255.255.0 192.168.1.2542         <enter>   Switch(ip)# show Configured      Current ————— ————— DHCP Client          : Disabled IP Address           : 192.168.1.10    192.168.1.10 IP Mask              : 255.255.255.0   255.255.255.0 IP Gateway           : 192.168.1.252   192.168.1.252 VLAN ID              : 1               1 DNS Server           : 0.0.0.0         0.0.0.0 DNS Proxy             : Disabled

    The post How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# ip        <enter>

    Switch(ip)#set 192.168.1.10 255.255.255.0 192.168.1.2542         <enter>

     

    Switch(ip)# show

    Configured      Current

    ————— —————

    DHCP Client          : Disabled

    IP Address           : 192.168.1.10    192.168.1.10

    IP Mask              : 255.255.255.0   255.255.255.0

    IP Gateway           : 192.168.1.252   192.168.1.252

    VLAN ID              : 1               1

    DNS Server           : 0.0.0.0         0.0.0.0

    DNS Proxy             : Disabled

    The post How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? first appeared on Rubytech.

    ]]>         What’s baud rate on the switch ? https://www.rubytech.com.tw/rubytech/faq/whats-baud-rate-on-the-switch/?utm_source=rss&utm_medium=rss&utm_campaign=whats-baud-rate-on-the-switch Thu, 28 Jan 2016 10:25:04 +0000 /rubytech/?post_type=faq&p=4163 Baud rate : 115200 Data : 8bit Parity : none Stop : 1 but Flow control : none

    The post What’s baud rate on the switch ? first appeared on Rubytech.

    ]]>     Baud rate : 115200

    Data : 8bit

    Parity : none

    Stop : 1 but

    Flow control : none

    The post What’s baud rate on the switch ? first appeared on Rubytech.

    ]]>