CLI - Rubytech https://www.rubytech.com.tw/rubytech Professional ODM Partner to Customize Networking products Thu, 28 Jan 2016 10:31:09 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.rubytech.com.tw/rubytech/wp-content/uploads/2017/11/logo.png CLI - Rubytech https://www.rubytech.com.tw/rubytech 32 32 How to import your config file into the switch by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-import-your-config-file-into-the-switch-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-import-your-config-file-into-the-switch-by-console-port Thu, 28 Jan 2016 10:31:09 +0000 /rubytech/?post_type=faq&p=4182 Install tftp client tool at your manage PC and designate directory is necessary . Type command on CLI. Switch# config-file Switch(config-file)# import 192.168.1.135 config.xml Saved 63007 bytes to server

The post How to import your config file into the switch by console port ? first appeared on Rubytech.

]]>
  • Install tftp client tool at your manage PC and designate directory is necessary .
  • Type command on CLI.

    • Switch# config-file

    Switch(config-file)# import 192.168.1.135 config.xml

    Saved 63007 bytes to server

    The post How to import your config file into the switch by console port ? first appeared on Rubytech.

    ]]>         How to export your configuration to a backup file by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-export-your-configuration-to-a-backup-file-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-export-your-configuration-to-a-backup-file-by-console-port Thu, 28 Jan 2016 10:30:33 +0000 /rubytech/?post_type=faq&p=4179 Install tftp client tool at your manage PC and designate directory is necessary . Type command on CLI. Switch# config-file Switch(config-file)# export 192.168.1.135 config.xml Saved 63007 bytes to server

    The post How to export your configuration to a backup file by console port ? first appeared on Rubytech.

    ]]>
  • Install tftp client tool at your manage PC and designate directory is necessary .
  • Type command on CLI.

    • Switch# config-file

    Switch(config-file)# export 192.168.1.135 config.xml

    Saved 63007 bytes to server

    The post How to export your configuration to a backup file by console port ? first appeared on Rubytech.

    ]]>         How to save configuration in backup area of flash by console port ? https://www.rubytech.com.tw/rubytech/faq/how-to-save-configuration-in-backup-area-of-flash-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-save-configuration-in-backup-area-of-flash-by-console-port Thu, 28 Jan 2016 10:29:53 +0000 /rubytech/?post_type=faq&p=4176 Type command on CLI. Switch# save user         <enter>

    The post How to save configuration in backup area of flash by console port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# save user         <enter>

    The post How to save configuration in backup area of flash by console port ? first appeared on Rubytech.

    ]]>         How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? https://www.rubytech.com.tw/rubytech/faq/how-to-keep-current-configuration-in-flash-by-console-port-after-the-switch-reboot-the-switch-will-reload-this-configuration/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-keep-current-configuration-in-flash-by-console-port-after-the-switch-reboot-the-switch-will-reload-this-configuration Thu, 28 Jan 2016 10:29:15 +0000 /rubytech/?post_type=faq&p=4173 Type command on CLI. Switch# save start        <enter>

    The post How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# save start        <enter>

    The post How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ? first appeared on Rubytech.

    ]]>         How do I configure DHCP client on the switch by console port ? https://www.rubytech.com.tw/rubytech/faq/how-do-i-configure-dhcp-client-on-the-switch-by-console-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-do-i-configure-dhcp-client-on-the-switch-by-console-port Thu, 28 Jan 2016 10:28:39 +0000 /rubytech/?post_type=faq&p=4170 Type command on CLI. Switch# ip        <enter> Switch(ip)# dhcp enable        <enter> Switch(ip)# show Configured      Current ————— ————— DHCP Client          : Enabled IP Address           : 192.168.1.10    192.168.1.220 IP Mask              : 255.255.255.0   255.255.255.0 IP Gateway           : 192.168.1.252   192.168.1.123 VLAN ID              : 1               1 DNS Server           : 0.0.0.0         192.168.1.1 Proxy                : Disabled

    The post How do I configure DHCP client on the switch by console port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# ip        <enter>

    Switch(ip)# dhcp enable        <enter>

    Switch(ip)# show

    Configured      Current

    ————— —————

    DHCP Client          : Enabled

    IP Address           : 192.168.1.10    192.168.1.220

    IP Mask              : 255.255.255.0   255.255.255.0

    IP Gateway           : 192.168.1.252   192.168.1.123

    VLAN ID              : 1               1

    DNS Server           : 0.0.0.0         192.168.1.1

    Proxy                : Disabled

    The post How do I configure DHCP client on the switch by console port ? first appeared on Rubytech.

    ]]>         How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? https://www.rubytech.com.tw/rubytech/faq/how-do-i-reconfigure-ip-address-subnet-mask-and-gateway-thecn-check-them-by-consoel-port/?utm_source=rss&utm_medium=rss&utm_campaign=how-do-i-reconfigure-ip-address-subnet-mask-and-gateway-thecn-check-them-by-consoel-port Thu, 28 Jan 2016 10:27:41 +0000 /rubytech/?post_type=faq&p=4167 Type command on CLI. Switch# ip        <enter> Switch(ip)#set 192.168.1.10 255.255.255.0 192.168.1.2542         <enter>   Switch(ip)# show Configured      Current ————— ————— DHCP Client          : Disabled IP Address           : 192.168.1.10    192.168.1.10 IP Mask              : 255.255.255.0   255.255.255.0 IP Gateway           : 192.168.1.252   192.168.1.252 VLAN ID              : 1               1 DNS Server           : 0.0.0.0         0.0.0.0 DNS Proxy             : Disabled

    The post How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? first appeared on Rubytech.

    ]]>     Type command on CLI.

    Switch# ip        <enter>

    Switch(ip)#set 192.168.1.10 255.255.255.0 192.168.1.2542         <enter>

     

    Switch(ip)# show

    Configured      Current

    ————— —————

    DHCP Client          : Disabled

    IP Address           : 192.168.1.10    192.168.1.10

    IP Mask              : 255.255.255.0   255.255.255.0

    IP Gateway           : 192.168.1.252   192.168.1.252

    VLAN ID              : 1               1

    DNS Server           : 0.0.0.0         0.0.0.0

    DNS Proxy             : Disabled

    The post How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ? first appeared on Rubytech.

    ]]>