OLT-E200

Product Overview


The OLT-E200 module needs to be installed on the CR-3816 manageable chassis, which is a 19-inch OLT chassis with cabinet height 3U. It is designed to accommodate 2 uplink ports with Gigabit Ethernet RJ-45/SFP combo interface and 2-Port GEPON OLT with SFP cage fiber interface modules at a central location for PON (Passive Optical Network) application. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection. The network management supports Web UI via browser, CLI via local console, Telnet interface and SNMP v1/v2c/v3. OLT-E200 supports IEEE 802.3ah OAM function for CO and CPE site, “Remote Failure Indication”, “Remote Loopback”, “Link Monitoring”, “Port Configuration” and “Bandwidth Configuration”.

Key Features


  • Interoperable with standard 19″ 3U high rack-mount chassis CR-3816
  • Supports 2-Port GEPON OLT fiber with SFP (Downstream: 2.5Gbps,Upstream:1.25Gbps)
  • Supports 2-Port GbE TP/SFP Combo ports for uplink
  • Provides 2-Port Gigabit Ethernet PON (Passive Optical Network), converting 10/100/1000 Mbps Ethernet into optical signals with an optical coupler for point-to-multipoint networks. The GEPON OLT for the center unit can be selected to provide datacom service for distances of up to 20 km
  • This OLT module supports up to 128 subscribers per module. One OLT-E200 has 2 ports EPON OLT fiber interface, it can handle up to 64 subscribers per fiber
  • Statistics Rising/Falling threshold for alarm
  • Configurable OLT alarm log function
  • RMON counters for port traffic quality monitoring function
  • IGMP proxy function
  • Max packet length: 1536 bytes
  • Module firmware upgradable
  • Provides module information (S/N, MAC, Model Name,….)
  • Module per port basic LEDs for monitoring
  • Provides media type, connector, wavelength and distance information
  • Supports hot-swap and auto reload configuration ability
  • The center unit automatically scans and records ID information from subscriber systems
  • IEEE 802.3ah OAM function for CO and CPE site “Remote
  • Failure Indication”, “Remote Loopback” and “Link Monitoring”
  • Supports OLT fiber redundant link on one module
  • Supports “Port Configuration” and “Bandwidth Configuration”
  • CO site interface ingress/egress bandwidth rating management
  • Supports MIB II, Enterprise, RMON MIB and SNMP Traps
  • Encryption in the PON layer assures security between subscribers
  • Supports each converter module media configured and monitored abilities :
Port state enabled/disabled
Auto-negotiation/forced mode
Port speed and duplex mode
Flow control enabled/disabled
Wire speed packet forwarding ability :

– 10Base : 14880 pps

– 100Base: 148800 pps

– 1000Base: 1413600 pps

– (64Bytes up to 95% utilization)

– (1518Bytes up to 97% utilization)

 

  • Supports EPON module per port basic counters for traffic raw data monitor of fiber and TP port
    as below :
Octets transferred
Total Frames transferred
Unicast Frames transferred
Broadcast Frames transferred
Multicast Frames transferred
CRC-32 Errors
Undersize Frames
Oversize Frames
Collisions
64 Octet Frames
65-127 Octet Frames
128-255 Octet Frames
256-511 Octet Frames
512-1023 Octet Frames
1024-1518 Octet Frames
1519+ Octet Frames
Frames dropped (queue overflow)
Pause Frames

Product Specification

blank
MODEL NAME OLT-E200
Product Description 2-Port GbE TP/SFP Combo to 2-Port GEPON Converter Module

LED Description

LED Color Funciton
PWR Green Lit when power is coming up
EPON 1 (Link) Green Light Green when EPON has at least one link registered
EPON 2 (Link) Green Light Green when EPON has at least one link registered
p2 TP (Link/ACT) Green Light Green when Tp2 link up

Blinks when any traffic is present

p2 SFP (Link/ACT) Green Light Green when SFp2 link up

Blinks when any traffic is present

P2 TP (Link/ACT) Green Light Green when TP2 link up

Blinks when any traffic is present

P2 SFP (Link/ACT) Green Light Green when SFP2 link up

Blinks when any traffic is present


Network Interface

Uplink RJ45/SFP Combo Port

RJ45:
– 10/100/1G Auto-Negotiation
– Auto-MDIX
– flow control for Full-Duplex
– backpressure for Half-Duplex

SFP:
– 100M/1G Auto Detection

OLT SFP Fiber Port

OLT 1000Base-PX-U:
– Link partner must be ONU 1000Base-PX-U

Note : Upstream=1310nm, Downstream=1490nm is the typical wavelength of EPON fiber transceiver


Standards:

IEEE802.3u 100Base-TX

IEEE802.3z/ab 1000Base-T

IEEE802.3ah 1000Base-PX-U (EPON)


UTP Cable:

Cat. 5 cable and up to 100m


Fiber Cable:

1000Base-PX-U

– 8.3/125mm Single-mode
– 8.7/125mm Single-mode
– 9/125mm Single-mode
– 10/125mm Single-mode


Power Input :

1.2A up @12VDC


Power Consumption :

14.4 W


Ambient Temperature:

0° ~ 40°C


Humidity:

5% ~ 90%


Dimensions:

32.2(H) x 275(D) mm


Emission:

Complies with FCC Part 15 Class A & CE Mark Approval

Model

Model Dscription
OLT-E200 2-Port GbE TP/SFP Combo to 2-Port GEPON Converter Module

Download


PDF Data sheet

+ Overview

Product Overview


The OLT-E200 module needs to be installed on the CR-3816 manageable chassis, which is a 19-inch OLT chassis with cabinet height 3U. It is designed to accommodate 2 uplink ports with Gigabit Ethernet RJ-45/SFP combo interface and 2-Port GEPON OLT with SFP cage fiber interface modules at a central location for PON (Passive Optical Network) application. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection. The network management supports Web UI via browser, CLI via local console, Telnet interface and SNMP v1/v2c/v3. OLT-E200 supports IEEE 802.3ah OAM function for CO and CPE site, “Remote Failure Indication”, “Remote Loopback”, “Link Monitoring”, “Port Configuration” and “Bandwidth Configuration”.

Key Features


  • Interoperable with standard 19″ 3U high rack-mount chassis CR-3816
  • Supports 2-Port GEPON OLT fiber with SFP (Downstream: 2.5Gbps,Upstream:1.25Gbps)
  • Supports 2-Port GbE TP/SFP Combo ports for uplink
  • Provides 2-Port Gigabit Ethernet PON (Passive Optical Network), converting 10/100/1000 Mbps Ethernet into optical signals with an optical coupler for point-to-multipoint networks. The GEPON OLT for the center unit can be selected to provide datacom service for distances of up to 20 km
  • This OLT module supports up to 128 subscribers per module. One OLT-E200 has 2 ports EPON OLT fiber interface, it can handle up to 64 subscribers per fiber
  • Statistics Rising/Falling threshold for alarm
  • Configurable OLT alarm log function
  • RMON counters for port traffic quality monitoring function
  • IGMP proxy function
  • Max packet length: 1536 bytes
  • Module firmware upgradable
  • Provides module information (S/N, MAC, Model Name,….)
  • Module per port basic LEDs for monitoring
  • Provides media type, connector, wavelength and distance information
  • Supports hot-swap and auto reload configuration ability
  • The center unit automatically scans and records ID information from subscriber systems
  • IEEE 802.3ah OAM function for CO and CPE site “Remote
  • Failure Indication”, “Remote Loopback” and “Link Monitoring”
  • Supports OLT fiber redundant link on one module
  • Supports “Port Configuration” and “Bandwidth Configuration”
  • CO site interface ingress/egress bandwidth rating management
  • Supports MIB II, Enterprise, RMON MIB and SNMP Traps
  • Encryption in the PON layer assures security between subscribers
  • Supports each converter module media configured and monitored abilities :
Port state enabled/disabled
Auto-negotiation/forced mode
Port speed and duplex mode
Flow control enabled/disabled
Wire speed packet forwarding ability :

– 10Base : 14880 pps

– 100Base: 148800 pps

– 1000Base: 1413600 pps

– (64Bytes up to 95% utilization)

– (1518Bytes up to 97% utilization)

 

  • Supports EPON module per port basic counters for traffic raw data monitor of fiber and TP port
    as below :
Octets transferred
Total Frames transferred
Unicast Frames transferred
Broadcast Frames transferred
Multicast Frames transferred
CRC-32 Errors
Undersize Frames
Oversize Frames
Collisions
64 Octet Frames
65-127 Octet Frames
128-255 Octet Frames
256-511 Octet Frames
512-1023 Octet Frames
1024-1518 Octet Frames
1519+ Octet Frames
Frames dropped (queue overflow)
Pause Frames
+ Specification

Product Specification

blank
MODEL NAME OLT-E200
Product Description 2-Port GbE TP/SFP Combo to 2-Port GEPON Converter Module

LED Description

LED Color Funciton
PWR Green Lit when power is coming up
EPON 1 (Link) Green Light Green when EPON has at least one link registered
EPON 2 (Link) Green Light Green when EPON has at least one link registered
p2 TP (Link/ACT) Green Light Green when Tp2 link up

Blinks when any traffic is present

p2 SFP (Link/ACT) Green Light Green when SFp2 link up

Blinks when any traffic is present

P2 TP (Link/ACT) Green Light Green when TP2 link up

Blinks when any traffic is present

P2 SFP (Link/ACT) Green Light Green when SFP2 link up

Blinks when any traffic is present


Network Interface

Uplink RJ45/SFP Combo Port

RJ45:
– 10/100/1G Auto-Negotiation
– Auto-MDIX
– flow control for Full-Duplex
– backpressure for Half-Duplex

SFP:
– 100M/1G Auto Detection

OLT SFP Fiber Port

OLT 1000Base-PX-U:
– Link partner must be ONU 1000Base-PX-U

Note : Upstream=1310nm, Downstream=1490nm is the typical wavelength of EPON fiber transceiver


Standards:

IEEE802.3u 100Base-TX

IEEE802.3z/ab 1000Base-T

IEEE802.3ah 1000Base-PX-U (EPON)


UTP Cable:

Cat. 5 cable and up to 100m


Fiber Cable:

1000Base-PX-U

– 8.3/125mm Single-mode
– 8.7/125mm Single-mode
– 9/125mm Single-mode
– 10/125mm Single-mode


Power Input :

1.2A up @12VDC


Power Consumption :

14.4 W


Ambient Temperature:

0° ~ 40°C


Humidity:

5% ~ 90%


Dimensions:

32.2(H) x 275(D) mm


Emission:

Complies with FCC Part 15 Class A & CE Mark Approval

+ Ordering Information

Model

Model Dscription
OLT-E200 2-Port GbE TP/SFP Combo to 2-Port GEPON Converter Module
+ Download

Download


PDF Data sheet