PSGC-110H

10/100/1000Base-T to 1000Base-X PoE PSE+GbE Media Converter


PSGC-110H is designed a 10/100/1000Base-T to 1000Based-SX/LX (SC/LC) GbE media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3at draft(Max. PoE output: 30W) and backward compatible with IEEE802.3af (Max. PoE output: 15.4W) Power Over Ethernet standard, this AC powered PoE media converter is a Power Sourcing Equipment Plus (PSE+: Means PoE High Power Output Device) which combines data received over a TP link with 56VDC power, providing power to IEEE802.3af or IEEE802.3at powered device (PD) over the existing CAT5 UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSGC-110H, both end devices can be notified of a loss of fiber link.

Key Features


  1. IEEE802.3at draft and IEEE802.3af PoE (Power over Ethernet) PSE compatible
    ― Internal AC power supply
    ― Over-current protection
    ― Under-current detection
    ― Minimum load sensing
    ― Fault Protection Input
    ― PSE MDI power enable/disable
  2. LFP (Link Fault Pass-through) and FEF (Far End Fault)
  3. Supports one 10/100/1000Base-T Gigabit Ethernet UTP port and one 1000Base-SX / LX (SC/LC) Gigabit Ethernet Fiber port
  4. Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
  5. Supports comprehensive types of fiber with different distances and connections, including SC/Bidi/LC and so on
  6. Supports auto mode on the TP port
  7. DIP switch to set configurations
    ― DIP 1: Cut through/Normal
    ― DIP 2: LFP/LFP DIS
    ― DIP 3: PoE/PoE DIS
  8. Supports jumbo frame (Normal Mode: 2KB, Cut-Through Mode: 9KB)
  9. PSE RJ-45 Pin-out Alternatives A/B Auto detection(Both Midspan and Endpoint)
  10. RoHS Compliance

Specifications


Standards

IEEE802.3 10Base-T
IEEE802.3u 100ase-TX
IEEE802.3z/ab 1000Base-T
1000Base-SX/LX
IEEE802.3x full-duplex flow control


Cable

UTP:Cat. 5 cable and up to 100m
Fiber:
1000SX:50/125, 62.5/125 multi-mode
1000LX:8.3/125, 8.7/125, 9/125 or 10/125μm single-mode


Data Transfer Rate

2000Mbps/full-duplex


Hardware Spec

Feature Detailed Description
Voltage 100 – 240 VAC, 47 –63 Hz
Consumption Max. up to 30Watts
Ambient Temperature 0 ~ 40°C
Humidity 5 ~ 90
Dimensions 40 (H) x 158 (W) x 133 (D) mm
Certification FCC Part 15 Class A,CE Mark

Network Interface

Category Connector Transmission Max. Cable
Length
Wavelength
10/100Baswe-TX RJ-45 Full/Half
Duplex
100M
1000Base-T RJ-45 Full
Duplex
100M
1000Base-SX (M-M) SC/LC Full
Duplex
0.55Km
50/125μm
850nm
1000Base-LX (S-M) SC/LC Full
Duplex
10/30/50Km
9/125μm
1310nm
or
1550nm

LED Indicator

LED Color Function
PWR Green Lit when power is coming up
FX LNK/ACT Green Lit when fiber connection is good
Blinks when fiber data is present
TP LNK/ACT Green Lit when TP connection is good
Blinks when TP data is present
10/100/1000Mbps Green/Amber Lit Green when TP link on 1000Mbps
Lit Amber when TP link on 100Mbps
Off when TP link on 10Mbps
PoE1 Green Lit when RJ-45 (1,2),(3,6) pairs detect PD
PoE2 Green Lit when RJ-45 (4,5),(7,8) pairs detect PD

Packing Information

Model Carton Dimensions pcs/Carton N.W (KG) G.W (KG)
PSGC-110HSC 530x512x345mm 14 18 19
PSGC-110HLC 530x512x345mm 14 18 19
PSGC-110HSC.Sxx 530x512x345mm 14 18 19
PSGC-110HBSx.xx 530x512x345mm 14 18 19

Ordering Information

PSGC-110HSC 10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM SC
PSGC-110HSC.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 10km
PSGC-110HSC.S30 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 30km
PSGC-110HSC.S50 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 50km
PSGC-110HBS5.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 10km, 1550nm
PSGC-110HBS3.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 10km, 1310nm
PSGC-110HBS5.S20 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1550nm
PSGC-110HBS3.S20 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1310nm
PSGC-110HLC 10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM LC
PSGC-110HLC.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 10km
PSGC-110HLC.S30 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 30km
PSGC-110HLC.S50 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 50km

Download


PDF Data sheet

+ Datasheet

10/100/1000Base-T to 1000Base-X PoE PSE+GbE Media Converter


PSGC-110H is designed a 10/100/1000Base-T to 1000Based-SX/LX (SC/LC) GbE media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3at draft(Max. PoE output: 30W) and backward compatible with IEEE802.3af (Max. PoE output: 15.4W) Power Over Ethernet standard, this AC powered PoE media converter is a Power Sourcing Equipment Plus (PSE+: Means PoE High Power Output Device) which combines data received over a TP link with 56VDC power, providing power to IEEE802.3af or IEEE802.3at powered device (PD) over the existing CAT5 UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSGC-110H, both end devices can be notified of a loss of fiber link.

Key Features


  1. IEEE802.3at draft and IEEE802.3af PoE (Power over Ethernet) PSE compatible
    ― Internal AC power supply
    ― Over-current protection
    ― Under-current detection
    ― Minimum load sensing
    ― Fault Protection Input
    ― PSE MDI power enable/disable
  2. LFP (Link Fault Pass-through) and FEF (Far End Fault)
  3. Supports one 10/100/1000Base-T Gigabit Ethernet UTP port and one 1000Base-SX / LX (SC/LC) Gigabit Ethernet Fiber port
  4. Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
  5. Supports comprehensive types of fiber with different distances and connections, including SC/Bidi/LC and so on
  6. Supports auto mode on the TP port
  7. DIP switch to set configurations
    ― DIP 1: Cut through/Normal
    ― DIP 2: LFP/LFP DIS
    ― DIP 3: PoE/PoE DIS
  8. Supports jumbo frame (Normal Mode: 2KB, Cut-Through Mode: 9KB)
  9. PSE RJ-45 Pin-out Alternatives A/B Auto detection(Both Midspan and Endpoint)
  10. RoHS Compliance

Specifications


Standards

IEEE802.3 10Base-T
IEEE802.3u 100ase-TX
IEEE802.3z/ab 1000Base-T
1000Base-SX/LX
IEEE802.3x full-duplex flow control


Cable

UTP:Cat. 5 cable and up to 100m
Fiber:
1000SX:50/125, 62.5/125 multi-mode
1000LX:8.3/125, 8.7/125, 9/125 or 10/125μm single-mode


Data Transfer Rate

2000Mbps/full-duplex


Hardware Spec

Feature Detailed Description
Voltage 100 – 240 VAC, 47 –63 Hz
Consumption Max. up to 30Watts
Ambient Temperature 0 ~ 40°C
Humidity 5 ~ 90
Dimensions 40 (H) x 158 (W) x 133 (D) mm
Certification FCC Part 15 Class A,CE Mark

Network Interface

Category Connector Transmission Max. Cable
Length
Wavelength
10/100Baswe-TX RJ-45 Full/Half
Duplex
100M
1000Base-T RJ-45 Full
Duplex
100M
1000Base-SX (M-M) SC/LC Full
Duplex
0.55Km
50/125μm
850nm
1000Base-LX (S-M) SC/LC Full
Duplex
10/30/50Km
9/125μm
1310nm
or
1550nm

LED Indicator

LED Color Function
PWR Green Lit when power is coming up
FX LNK/ACT Green Lit when fiber connection is good
Blinks when fiber data is present
TP LNK/ACT Green Lit when TP connection is good
Blinks when TP data is present
10/100/1000Mbps Green/Amber Lit Green when TP link on 1000Mbps
Lit Amber when TP link on 100Mbps
Off when TP link on 10Mbps
PoE1 Green Lit when RJ-45 (1,2),(3,6) pairs detect PD
PoE2 Green Lit when RJ-45 (4,5),(7,8) pairs detect PD

Packing Information

Model Carton Dimensions pcs/Carton N.W (KG) G.W (KG)
PSGC-110HSC 530x512x345mm 14 18 19
PSGC-110HLC 530x512x345mm 14 18 19
PSGC-110HSC.Sxx 530x512x345mm 14 18 19
PSGC-110HBSx.xx 530x512x345mm 14 18 19

Ordering Information

PSGC-110HSC 10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM SC
PSGC-110HSC.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 10km
PSGC-110HSC.S30 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 30km
PSGC-110HSC.S50 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM SC 50km
PSGC-110HBS5.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 10km, 1550nm
PSGC-110HBS3.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 10km, 1310nm
PSGC-110HBS5.S20 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1550nm
PSGC-110HBS3.S20 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM Bidi SC 20km, 1310nm
PSGC-110HLC 10/100/1000Base-T to 1000Base-SX PoE PSE+ GbE converter, MM LC
PSGC-110HLC.S10 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 10km
PSGC-110HLC.S30 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 30km
PSGC-110HLC.S50 10/100/1000Base-T to 1000Base-LX PoE PSE+ GbE converter, SM LC 50km
+ Download

Download


PDF Data sheet