CR-3816
Product Overview
The manageable box is a 19-inch Media Converter Chassis with cabinet height 3U. It is designed to accommodate 16 slots of various type of fiber media converter module at a central location for multiple segments cross connection and network management. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection. The network management supports Web UI via browser, CLI via local console, Telnet interface and SNMPv2c. Supports IEEE 802.3ah OAM function for CO and CPE site “Remote Failure Indication”, “Remote Loopback” and “Link Monitoring”. Supports “Port Configuration” and “Bandwidth Configuration”. Models equipped with DC-48V power unit are also available for Telecom applications.
Key Features
-
- Supports standard 19″ 3U high rack-mount chassis with 16 slots for
converter modules - 19-inch rack mount
- Supports standard 19″ 3U high rack-mount chassis with 16 slots for
—The concentrator unit will fit in both Electronic Industries Association (EIA) standard compliant racks.
- Supports 3 fans for chassis heat radiating
- Operating temp range 0 ~ 40℃
- Supports chassis temperature detection with F/C both degree
- Supports FAN rotation rate (RPM) detection
- Supports chassis ID (CID) for chassis location indication
- Built-in management CPU module:
—Supports DB-9 RS232 interface for console
—Supports two Ethernet ports in management network
- Management Board LED display: PowerA/B, UTP port: Act/Link, CPU
Run - Supports hot-swappable and upgradeable management CPU module
- Supports hot-swappable converter modules
- Supports hot-swappable and loading-shared redundant power units,each can be DC or AC. Independent power input for each power modules
- Supports Real-Time Clock (RTC)
- Power monitor (absent/present, ON/OFF, DC/AC), fans monitor and
temperature monitor - Power supply: Hot-swap redundant, high reliability/safety
- Supports CO/CPE conversion port configuration for port state
- Speed/Duplex, Flow Control and Bandwidth setting
- Comply with RoHS Requirement
- Provides a Gigabit Ethernet PON (Passive Optical Network),converting 10/100/1000 Mbps Ethernet into optical signals with an optical coupler for point-to-multipoint networks. The EPON OLT converter module for the center unit can be selected to provide datacom service for distances of up to 20 km. The same subscriber unit EPON ONU converter is used for remote CPE site, whether 20 km type.
- One OLT handles up to 32 subscribers per fiber
—Implements full duplex with single SM fiber links, along with an optical coupler for 32 branches, making it possible to handle up to 32 subscribers per single optical fiber.
- One chassis supports up to 512 subscribers
—The center unit (rear access type) uses high-density packing to fit up to 512 subscribers into a 3U case height (132 mm), saving your valuable rack space.
- Independent channel configuration
—Additional EPON converter module can be added as needed to economically handle subscriber growth. In addition, maintenance is possible in channel units, making it possible to respond to a fault on one channel without affecting the others.
Product Specification
| MODEL NAME | CR-3816 |
|---|---|
| Product Description | 16-Slot EPON Converter Chassis |
Model Description
16-slot managed EPON converter chassis for modular EPON Media converter with redundant AC Power or redundant -48VDC Power
| Converter Chassis Model | Power Supply Configuration | DC Output | Slots |
|---|---|---|---|
| CR-3816RAC | Two AC 100 or 240V Power Module w/ Redundancy | 400W @+12V | 16 |
| CR-3816AC | One AC 100 or 240V Power Module wo/ Redundancy | 200W @+12V | 16 |
| CR-3816RDC | Two DC -48V Power Module w/ Redundancy | 400W @+12V | 16 |
| CR-3816DC | One DC -48V Power Module wo/ Redundancy | 200W @+12V | 16 |
| CR-3816RADC | One AC 100 or 240V and One DC –48V Power Module w/ Redundancy | 400W @+12V | 16 |
| Power Model | Power Supply Configuration | DC Output |
|---|---|---|
| CPS-AC200W | Redundant AC 100 or 240V | 200W @+12V |
| CPS-DC200W | Redundant DC -48V | 200W @+12V |
| OLT Converter Model | Description |
|---|---|
| OLT-E100BS4.S20 | 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20Km, 1490nm |
Note:
-The OLT modules are ordered by model number and with a separate package
-The slide-in modules and converter chassis should be supplied only by the same manufacturer/vender. Both converter and chassis rack are built to match each other at dimensions, power bus/receptacle and power safety, etc.
-OLT-E100BS4.S20 must be installed in pairs, i.e.,OLT-E100BS4.S20 at one end and ONU-E100BS3.S10 or ONU-E100BS3.S20 at the other one
Capacity:
16 Slots for modular Media converter
Management
SNMP and web-base via in-band LAN port or local serial CLI
Power supply
Hot-swap redundant, high reliability/safety
Redundant Power Requirement
| AC Power Input: | Telecom DC Input: | ||
|---|---|---|---|
| Voltage: | 100 or 240VAC | Voltage: | -48VDC |
| Frequency: | 50~60Hz | NA | NA |
| Dissipation: | 200W maximum | Dissipation: | 200W Maximum |
| Feature | Detailed Description |
|---|---|
| Ambient Temperature | 0° to 40°C |
| Humidity | 5% to 90% |
| Dimensions | 132(H) x 440(W) x 336.5(L) mm |
| Weight | 8.52Kg (without power |
| 9.54 kg (includes 1 x AC power | |
| 10.56 Kg (includes 2 x AC power | |
| 9.57 kg (includes 1 x DC power | |
| 10.62 kg (includes 2 x DC power | |
| 10.59 kg (includes 1 x AC power | |
| Safety | Comply with FCC Part 15 Class A & CE Mark Approval |
Packing Information
| Carton Dimensions (mm) | pcs/Carton | N.W (KG) | G.W (KG) |
|---|---|---|---|
| 500x447x300 | 1 | 11.6 | 12.6 |
Model
| Model | Dscription |
|---|---|
| CR-3816RAC | 16-Slot EPON Converter Chassis with Dual AC Input Redundant Power Supply |
| CR-3816RDC | 16-Slot EPON Converter Chassis with Dual DC Input Redundant Power Supply |
| CR-3816RADC | 16-Slot EPON Converter Chassis with AC+DC Input Redundant Power Supply |
| CR-3816AC | 16-Slot EPON Converter Chassis with Single AC Input Redundant Power Supply |
| CR-3816DC | 16-Slot EPON Converter Chassis with Single DC Input Redundant Power Supply |
| OLT-E100BS4.S20 | 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20km, 1490nm |
| ONU-E100BS3.S10 | 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm |
| ONU-E100BS3.S20 | 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm |
Optional Accessory
| Model | Description |
|---|---|
| CPS-AC200W | AC-DC Power Module 200W/12V, 100 or 240VAC, 50/60Hz |
| CPS-DC200W | DC-DC Power Module 200W/12V, -48VDC |
Download
PDF Data sheet
- + Overview
-
Product Overview
The manageable box is a 19-inch Media Converter Chassis with cabinet height 3U. It is designed to accommodate 16 slots of various type of fiber media converter module at a central location for multiple segments cross connection and network management. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection. The network management supports Web UI via browser, CLI via local console, Telnet interface and SNMPv2c. Supports IEEE 802.3ah OAM function for CO and CPE site “Remote Failure Indication”, “Remote Loopback” and “Link Monitoring”. Supports “Port Configuration” and “Bandwidth Configuration”. Models equipped with DC-48V power unit are also available for Telecom applications.
Key Features
-
- Supports standard 19″ 3U high rack-mount chassis with 16 slots for
converter modules - 19-inch rack mount
- Supports standard 19″ 3U high rack-mount chassis with 16 slots for
—The concentrator unit will fit in both Electronic Industries Association (EIA) standard compliant racks.
- Supports 3 fans for chassis heat radiating
- Operating temp range 0 ~ 40℃
- Supports chassis temperature detection with F/C both degree
- Supports FAN rotation rate (RPM) detection
- Supports chassis ID (CID) for chassis location indication
- Built-in management CPU module:
—Supports DB-9 RS232 interface for console
—Supports two Ethernet ports in management network
- Management Board LED display: PowerA/B, UTP port: Act/Link, CPU
Run - Supports hot-swappable and upgradeable management CPU module
- Supports hot-swappable converter modules
- Supports hot-swappable and loading-shared redundant power units,each can be DC or AC. Independent power input for each power modules
- Supports Real-Time Clock (RTC)
- Power monitor (absent/present, ON/OFF, DC/AC), fans monitor and
temperature monitor - Power supply: Hot-swap redundant, high reliability/safety
- Supports CO/CPE conversion port configuration for port state
- Speed/Duplex, Flow Control and Bandwidth setting
- Comply with RoHS Requirement
- Provides a Gigabit Ethernet PON (Passive Optical Network),converting 10/100/1000 Mbps Ethernet into optical signals with an optical coupler for point-to-multipoint networks. The EPON OLT converter module for the center unit can be selected to provide datacom service for distances of up to 20 km. The same subscriber unit EPON ONU converter is used for remote CPE site, whether 20 km type.
- One OLT handles up to 32 subscribers per fiber
—Implements full duplex with single SM fiber links, along with an optical coupler for 32 branches, making it possible to handle up to 32 subscribers per single optical fiber.
- One chassis supports up to 512 subscribers
—The center unit (rear access type) uses high-density packing to fit up to 512 subscribers into a 3U case height (132 mm), saving your valuable rack space.
- Independent channel configuration
—Additional EPON converter module can be added as needed to economically handle subscriber growth. In addition, maintenance is possible in channel units, making it possible to respond to a fault on one channel without affecting the others.
-
- + Specification
-
Product Specification
MODEL NAME CR-3816 Product Description 16-Slot EPON Converter Chassis Model Description
16-slot managed EPON converter chassis for modular EPON Media converter with redundant AC Power or redundant -48VDC Power
Converter Chassis Model Power Supply
ConfigurationDC Output Slots CR-3816RAC Two AC 100 or 240V Power
Module w/ Redundancy400W @+12V 16 CR-3816AC One AC 100 or 240V Power
Module wo/ Redundancy200W @+12V 16 CR-3816RDC Two DC -48V Power
Module w/ Redundancy400W @+12V 16 CR-3816DC One DC -48V Power
Module wo/ Redundancy200W @+12V 16 CR-3816RADC One AC 100 or 240V and
One DC –48V Power
Module w/ Redundancy400W @+12V 16 Power Model Power Supply
ConfigurationDC Output CPS-AC200W Redundant AC 100 or 240V 200W @+12V CPS-DC200W Redundant DC -48V 200W @+12V OLT Converter Model Description OLT-E100BS4.S20 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20Km, 1490nm Note:
-The OLT modules are ordered by model number and with a separate package-The slide-in modules and converter chassis should be supplied only by the same manufacturer/vender. Both converter and chassis rack are built to match each other at dimensions, power bus/receptacle and power safety, etc.
-OLT-E100BS4.S20 must be installed in pairs, i.e.,OLT-E100BS4.S20 at one end and ONU-E100BS3.S10 or ONU-E100BS3.S20 at the other one
Capacity:
16 Slots for modular Media converter
Management
SNMP and web-base via in-band LAN port or local serial CLI
Power supply
Hot-swap redundant, high reliability/safety
Redundant Power Requirement
AC Power Input: Telecom DC Input: Voltage: 100 or 240VAC Voltage: -48VDC Frequency: 50~60Hz NA NA Dissipation: 200W maximum Dissipation: 200W Maximum Feature Detailed Description Ambient Temperature 0° to 40°C Humidity 5% to 90% Dimensions 132(H) x 440(W) x 336.5(L) mm Weight 8.52Kg (without power 9.54 kg (includes 1 x AC power 10.56 Kg (includes 2 x AC power 9.57 kg (includes 1 x DC power 10.62 kg (includes 2 x DC power 10.59 kg (includes 1 x AC power Safety Comply with FCC Part 15 Class A & CE Mark Approval Packing Information
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG) 500x447x300 1 11.6 12.6 - + Ordering Information
-
Model
Model Dscription CR-3816RAC 16-Slot EPON Converter Chassis with Dual AC Input Redundant Power Supply CR-3816RDC 16-Slot EPON Converter Chassis with Dual DC Input Redundant Power Supply CR-3816RADC 16-Slot EPON Converter Chassis with AC+DC Input Redundant Power Supply CR-3816AC 16-Slot EPON Converter Chassis with Single AC Input Redundant Power Supply CR-3816DC 16-Slot EPON Converter Chassis with Single DC Input Redundant Power Supply OLT-E100BS4.S20 1-Port Gigabit Ethernet to EPON OLT Module, CO SC 20km, 1490nm ONU-E100BS3.S10 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm ONU-E100BS3.S20 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm Optional Accessory
Model Description CPS-AC200W AC-DC Power Module 200W/12V, 100 or 240VAC, 50/60Hz CPS-DC200W DC-DC Power Module 200W/12V, -48VDC - + Download
-
Download
PDF Data sheet