GE-C351
Product Overview
GE-C351 is a Gigabit Ethernet media converter. It supports conversion of Gigabit Ethernet 1000Base-T signal to 1000Base-LX over a single fiber strand using an integrated Wavelength Division Multiplexer (WDM). The WDM technology employs passive optic multiplexing, thus multiplexs the transmit (TX) and receive (RX) lines onto a single fiber. It will save a half cabling cost by replacing regular dual fiber converter with GE-C351.
A pair of GE-C351 of distinct wavelength, 1310nm and 1550nm, should be installed in pair, i.e., 1310 model at one end and 1550 model at the other. It transmits up to 20 km point to point over single mode fiber. The GE-C351 can be used as a standalone unit or as a slide-in module to Ruby Tech CR-10XX series converter rack for use at a central wiring closet.
Key Features
- WDM Technology Combine Two Fiber Cables into One Single Fiber
- Greatly Save the Installation Cost of Expensive Fiber Cable
- Standalone or Composite Applications
- Supports 1000 Mbps NWay switches and 1000 Mbps NICs
- >RoHS Compliance
Product Specification
| MODEL NAME | GE-C351 |
|---|---|
| Product Description | 1000Base-T to 1000Base-X GbE Media Converter |
Standards:
IEEE802.3 1000Base-T to 1000Base-LX
UTP Cable:
Cat. 5 cable up to 100m
Fiber Cable:
8.3/125, 8.7/125, 9/125 or 10/125um single-mode up to 20Km
Data Transfer Rate:
Full Wire Data Transfer Rate：148,8000 PPS
(Packet Per Second) in 1000Mbps Speed
LED Indicator:
| FX LNK | Lit when fiber connection is good |
| FX FDX | Lit when fiber full-duplex is active |
| TP LNK | Lit when TP connection is good |
| TP FDX | Lit when TP full-duplex is active |
| ACT | Lit when any traffic is present |
| PWR | Lit when +5V power is coming up |
Power Requirement:
2A@5VDC
Ambient Temperature :
0~50°C
Humidity:
5%~90%
Dimensions:
26.2(H) x 70.3(W) x 94(D) mm
Weight:
0.2kg
Certification:
Comply with FCC Part 15 Class A, CE Mark approval & UL
Packing Information:
| Carton Dimensions (mm) | pcs/Carton | N.W (KG) | G.W (KG) |
| 530x512x345 | 40 | 24 | 25 |
Model
| Model | Dscription |
|---|---|
| GE-C351BS3.S20 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 20km, 1310nm |
| GE-C351BS5.S20 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 20km, 1550nm |
| GE-C351BS3.S40 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 40km, 1310nm |
| GE-C351BS5.S40 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 40km, 1550nm |
| GE-C351BS3.S60 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 60km, 1310nm |
| GE-C351BS5.S60 | 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 60km, 1550nm |
Note ：The 1310nm and 1550nm models must be installed in pairs, i.e., install 1310nm model at one end and 1550nm model at the other one.
Download
PDF Data sheet
- + Overview
-
Product Overview
GE-C351 is a Gigabit Ethernet media converter. It supports conversion of Gigabit Ethernet 1000Base-T signal to 1000Base-LX over a single fiber strand using an integrated Wavelength Division Multiplexer (WDM). The WDM technology employs passive optic multiplexing, thus multiplexs the transmit (TX) and receive (RX) lines onto a single fiber. It will save a half cabling cost by replacing regular dual fiber converter with GE-C351.
A pair of GE-C351 of distinct wavelength, 1310nm and 1550nm, should be installed in pair, i.e., 1310 model at one end and 1550 model at the other. It transmits up to 20 km point to point over single mode fiber. The GE-C351 can be used as a standalone unit or as a slide-in module to Ruby Tech CR-10XX series converter rack for use at a central wiring closet.Key Features
- WDM Technology Combine Two Fiber Cables into One Single Fiber
- Greatly Save the Installation Cost of Expensive Fiber Cable
- Standalone or Composite Applications
- Supports 1000 Mbps NWay switches and 1000 Mbps NICs
- >RoHS Compliance
- + Specification
-
Product Specification
MODEL NAME GE-C351 Product Description 1000Base-T to 1000Base-X GbE Media Converter Standards:
IEEE802.3 1000Base-T to 1000Base-LX
UTP Cable:
Cat. 5 cable up to 100m
Fiber Cable:
8.3/125, 8.7/125, 9/125 or 10/125um single-mode up to 20Km
Data Transfer Rate:
Full Wire Data Transfer Rate：148,8000 PPS
(Packet Per Second) in 1000Mbps SpeedLED Indicator:
FX LNK Lit when fiber connection is good FX FDX Lit when fiber full-duplex is active TP LNK Lit when TP connection is good TP FDX Lit when TP full-duplex is active ACT Lit when any traffic is present PWR Lit when +5V power is coming up Power Requirement:
2A@5VDC
Ambient Temperature :
0~50°C
Humidity:
5%~90%
Dimensions:
26.2(H) x 70.3(W) x 94(D) mm
Weight:
0.2kg
Certification:
Comply with FCC Part 15 Class A, CE Mark approval & UL
Packing Information:
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG) 530x512x345 40 24 25 - + Ordering Information
-
Model
Model Dscription GE-C351BS3.S20 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 20km, 1310nm GE-C351BS5.S20 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 20km, 1550nm GE-C351BS3.S40 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 40km, 1310nm GE-C351BS5.S40 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 40km, 1550nm GE-C351BS3.S60 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 60km, 1310nm GE-C351BS5.S60 1000Base-T to 1000Base-X GbE Media Converter, Bidi SC Single-Mode 60km, 1550nm Note ：The 1310nm and 1550nm models must be installed in pairs, i.e., install 1310nm model at one end and 1550nm model at the other one.
- + Download
-
Download
PDF Data sheet