IFE-C130

IFE-C130 Industrial 10/100Base-TX to 100Base-FX FE Media Converter with LFP

IFE-C130 is an industrial 10/100Base-TX to 100Base-FX media converter with LFP (Link Fault Pass-through) function for easily tracing the network link failure. LFP function enhances the integrity and conformity of the TP-Fiber link and improves the maintainability of the network. IFE-C130 can be installed in CR-1112 converter chassis, or powered through external power adapter. Five LEDs are provided to monitor the operation status of the converter, and the DIP Switch on the side panel is used to set the required working configurations to meet various applications.

Key Features

  1. LFP (Link Fault Pass-through) Function
  2. Choice of SC, ST or LC connector for multimode and single mode
  3. DIP Switch to set configurations
  4. Supports packet length up to 1536 bytes
  5. Supports operating temperature range -10°C to 60°C
  6. Provides Chassis or Din Rail installation
  7. Provides optional -10°C ~ 60°C AC-DC power adapter
  8. RoHS Compliance

Specifications

  • Standard Compliance


    IEEE802.3u 10/100Base-TX
    100Base-FX

  • Data Transfer Rate


    100Mbps:148,800 pps
    10Mbps:14,880 pps

  • Buffer Memory


    128K

  • Connector


    RJ-45: 10/100Mbps (Auto-negotiation)
    ST/SC/LC: 100Mbps

  • Cable


    TP: Cat.5 (Support distance up to 100m)
    Fiber (M-M):50/125,2.5/125,100/140μm(Support distance up to 2Km)
    Fiber (S-M):8.3/125,8.7/125,9/125,100/125μm(Support distance up to 100Km)

  • Flow Control


    IEEE802.3x compliant for full-duplex
    Backpressure flow control for half-duplex

LED Description

LED Description
FX LNK/ACT Fiber connection/Active
FX FDX/COL Fiber Full duplex/ Collision
TX LNK/ACT TP connection / Active
TX 100 TP 100M Speed
POWER Power link

DIP Switch Function

DIP Switch Description
TP port mode Auto (default) or Force
TP port speed 100 or 10 when TP at Force
TP port duplex FDX or HDX when TP at Force
LFP LFP enabled (default) or disabled
Fiber port duplex 100 FDX (default) or 100 HDX

Network Interface

Category Connector Transmission Max. Cable Length Wavelength
10-T/100-TX RJ-45 Full/Half
Duplex		 100M
100-FX (M-M) SC/ST Full/Half
Duplex		 2Km
50/125μm		 1310nm
100-FX (S-M) SC Full/Half
Duplex		 5/20/60Km
9/125μm		 1310nm
100-FX (S-M) Bidi-SC Full/Half
Duplex		 20Km
9/125μm		 1310nm
1550nm

Hardware Spec

Feature Detailed Description
Voltage +5V DC
Ambient Temperature -10° to 60°C
Humidity 5% to 95%
Dimensions 26.2(H) x 70.3(W) x 94(D) mm
Weight 0.2kg
Installation Desktop, Chassis, Din Rail (Optional)
EMI CISPR 22:A1:2000+A2:2002
ICES-003:2004,Class A
EMC EN55022:Class A
EN61000-3-2:2000
EN61000-3-3:1995+A1:2001
EN55024
IEC61000-4-2/3/4/5/6/8/11
Shock IEC60068-2-27
Freefall IEC60068-2-32
Vibration IEC60068-2-6
Casing IP20 Protection
MTBF 185,000 hr
Warranty 3 Years

Download

PDF Data sheet

+ Datasheet

IFE-C130 Industrial 10/100Base-TX to 100Base-FX FE Media Converter with LFP

IFE-C130 is an industrial 10/100Base-TX to 100Base-FX media converter with LFP (Link Fault Pass-through) function for easily tracing the network link failure. LFP function enhances the integrity and conformity of the TP-Fiber link and improves the maintainability of the network. IFE-C130 can be installed in CR-1112 converter chassis, or powered through external power adapter. Five LEDs are provided to monitor the operation status of the converter, and the DIP Switch on the side panel is used to set the required working configurations to meet various applications.

Key Features

  1. LFP (Link Fault Pass-through) Function
  2. Choice of SC, ST or LC connector for multimode and single mode
  3. DIP Switch to set configurations
  4. Supports packet length up to 1536 bytes
  5. Supports operating temperature range -10°C to 60°C
  6. Provides Chassis or Din Rail installation
  7. Provides optional -10°C ~ 60°C AC-DC power adapter
  8. RoHS Compliance

Specifications

  • Standard Compliance


    IEEE802.3u 10/100Base-TX
    100Base-FX

  • Data Transfer Rate


    100Mbps:148,800 pps
    10Mbps:14,880 pps

  • Buffer Memory


    128K

  • Connector


    RJ-45: 10/100Mbps (Auto-negotiation)
    ST/SC/LC: 100Mbps

  • Cable


    TP: Cat.5 (Support distance up to 100m)
    Fiber (M-M):50/125,2.5/125,100/140μm(Support distance up to 2Km)
    Fiber (S-M):8.3/125,8.7/125,9/125,100/125μm(Support distance up to 100Km)

  • Flow Control


    IEEE802.3x compliant for full-duplex
    Backpressure flow control for half-duplex

LED Description

LED Description
FX LNK/ACT Fiber connection/Active
FX FDX/COL Fiber Full duplex/ Collision
TX LNK/ACT TP connection / Active
TX 100 TP 100M Speed
POWER Power link

DIP Switch Function

DIP Switch Description
TP port mode Auto (default) or Force
TP port speed 100 or 10 when TP at Force
TP port duplex FDX or HDX when TP at Force
LFP LFP enabled (default) or disabled
Fiber port duplex 100 FDX (default) or 100 HDX

Network Interface

Category Connector Transmission Max. Cable Length Wavelength
10-T/100-TX RJ-45 Full/Half
Duplex		 100M
100-FX (M-M) SC/ST Full/Half
Duplex		 2Km
50/125μm		 1310nm
100-FX (S-M) SC Full/Half
Duplex		 5/20/60Km
9/125μm		 1310nm
100-FX (S-M) Bidi-SC Full/Half
Duplex		 20Km
9/125μm		 1310nm
1550nm

Hardware Spec

Feature Detailed Description
Voltage +5V DC
Ambient Temperature -10° to 60°C
Humidity 5% to 95%
Dimensions 26.2(H) x 70.3(W) x 94(D) mm
Weight 0.2kg
Installation Desktop, Chassis, Din Rail (Optional)
EMI CISPR 22:A1:2000+A2:2002
ICES-003:2004,Class A
EMC EN55022:Class A
EN61000-3-2:2000
EN61000-3-3:1995+A1:2001
EN55024
IEC61000-4-2/3/4/5/6/8/11
Shock IEC60068-2-27
Freefall IEC60068-2-32
Vibration IEC60068-2-6
Casing IP20 Protection
MTBF 185,000 hr
Warranty 3 Years
+ Download

Download

PDF Data sheet