ONU-E100C

Product Overview

The Converter is designed to make conversion between 10/100/1000Base-T and EPON fiber Ethernet in the CPE site conversion device. It could be managed with CO site chassis by web-based management and CLI (command line interface), the network administrator can monitor, configure and control the activity of each port. In addition, the EPON CPE converter implements bandwidth rating management capability via the intelligent software. The overall network management is enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth applications

Key Features

    • Supports two ports for CPE LAN site, one is 10/100/1000Base-T Gigabit Ethernet port and one is 10/100Base-Tx Fast Ethernet port
    • Supports one EPON port for EPON site
    • Supports Gigabit Ethernet-PON IEEE 802.3ah compliance
    • Supports IEEE 802.3ah OAM function
    • Supports IEEE 802.3ah forward error correction
    • Supports 802.3z Gigabit Ethernet local-side interface
    • Supports bandwidth control
    • Supports up to 8 Logical Link IDs (LLID)
    • Supports 64 MAC address entries per Ethernet port
    • Supports 802.1p QoS
    • Supports 802.1Q VLAN
    • Supports 40 queues (20 upstream / 20 downstream)
    • Supports 1.25M Bytes packet buffer
    • Assurance of security for subscribers

—Encryption in the PON layer assures security between subscribers.

    • Supports each converter module media configured and monitored ability:
    • Supports port state enabled/disabled
    • Supports auto-negotiation/forced mode
    • Supports port speed and duplex mode
    • Supports flow control enabled/disabled
    • Supports wire speed packet forwarding ability as below:

—10Base : 14880 pp

—100Base: 148800 pps

—1000Base: 1413600 pps

(64Bytes up to 95% utilization)

(1518Bytes up to 97% utilization)

  • Supports EPON module per port basic counters for traffic raw data monitor of fiber and TP port. as below:
  • —Octets transferred—Total Frames transferred—Unicast Frames transferred

    —Broadcast Frames transferred

    —Multicast Frames transferred

    —CRC-32 Errors

    —Undersize Frames

    —Oversize Frames

    —Collisions

    —64 Octet Frames

    —65-127 Octet Frames

    —128-255 Octet Frames

    —256-511 Octet Frames

    —512-1023 Octet Frames

    —1024-1518 Octet Frames

    —1519+ Octet Frames

    —Frames dropped (queue overflow)

    —Pause Frames

  • Supports alarm log function
  • Supports counters for port traffic quality monitoring function
  • Supports IGMP snooping function
  • Supports max packet length: 1536 bytes
  • Supports firmware upgrade
  • Supports device Information (S/N, MAC, Model Name,….)
  • Supports per port basic LEDs for monitoring
  • Supports media type, connector, wavelength and distance information
  • RoHS Compliance

Product Specification

MODEL NAME ONU-E100C
Product Description 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE

LED Description

LED Color Function
PWR Green Lit when power is coming up
OLTLNK Green Lit when EPON port detects the signal from OLT.
LLID1-8 Green Off when LLID is used, or else is light.
UNI1-GbE LINK/ACT Green Lit when GbE port is linked.
Blink when GbE port is transmitting or receiving.
UNI1-GbE
10/100/1000		 Green/
Yellow		 Green lit when GbE port links on 1000Mbps speed.
Yellow lit when GbE port links on 100Mbps speed.
Off when GbE port links on 10Mbps or unlinks.
UNI1-GbE
FDX		 Yellow Lit when Full-Duplex is enabled
UNI2-FE
LNK/ACT		 Green Lit when FE port is linked.
Blink when FE port is transmitting or receiving.
UNI2-FE
10/100		 Green Lit when FE port links on 100Mbps speed.
Off when FE port links on 10Mbps or unlinks.
UNI1-FE
FDX		 Yellow Lit when Full-Duplex is enabled

Network Interface

Converter
TP Port		 10/100Base-TX:
– Auto-Negotiation
– Auto-MDIX
– flow control for Full-Duplex
– backpressure for Half-Duplex
1000Base-T:
– Auto-Negotiation Mode only
– Auto-MDIX only for Auto-Negotiation
– flow control for Full-Duplex only
Converter
Fiber Port		 ONU 1000Base-PX-U:
– Link partner must be OLT 1000Base-PX-U

TP Cable Limitations

Cat. 5 and up to 100m

Fiber Cable Limitations

ONU 1000PX
Single-Mode Fiber 9/125mm
Single-Mode transceiver
Output:1310nm 10 / 20Km
Note: Upstream=1310nm, Downstream=1490nm is the wavelength of EPON fiber transceiver

Standards

IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3z/ab 1000Base-T,
IEEE802.3ah 1000Base-PX-U (EPON)

UTP Cable

Cat. 5 cable and up to 100m

Fiber Cable

1000Base-PX-U: 8.3/125, 8.7/125, 9/125 or 10/125mm Single-Mode

LED Indicators

PWR,
EPON LLID 1-8, OLTLNK,
UNI1-GbE LNK/ACT, 10/100/1000, FDX
UNI2-FE LNK/ACT, 10/100, FDX

Data Transfer Rate

Upstream: Max. Up to 950 Mbps
Downstream: Max. Up to 970 Mbps

TP Interface (UNI1-GbE and UNI2-FE):

10/100Base-TX:
NWay auto-negotiation
Auto-MDIX
Full/Half-Duplex

1000Base-T:
NWay auto-negotiation or force
Auto-MDIX(only for Auto mode)
Full-Duplex only

Fiber Interface

1000Base-PX-U (EPON):
Connector: SC/BiDi
Max. Cable Length: 20Km for 9/125u
Upstream (ONU TX) Wavelength: 1310nm
Downstream (ONU RX) Wavelength: 1490nm

Power Requirement

0.8A up @+5VDC

Power Consumption

3.5 W

Ambient Temperature

0° to 50°C

Humidity

5% to 90%

Dimensions

26.8(H) ´ 139(W) ´ 101.5(D) mm

Packing Information

Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
523x489x267 12 10.8 11.8

Model

Model Dscription
ONU-E100BS3.S10 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm
ONU-E100BS3.S20 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm

Download

PDF Data sheet

+ Overview

Product Overview

The Converter is designed to make conversion between 10/100/1000Base-T and EPON fiber Ethernet in the CPE site conversion device. It could be managed with CO site chassis by web-based management and CLI (command line interface), the network administrator can monitor, configure and control the activity of each port. In addition, the EPON CPE converter implements bandwidth rating management capability via the intelligent software. The overall network management is enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth applications

Key Features

    • Supports two ports for CPE LAN site, one is 10/100/1000Base-T Gigabit Ethernet port and one is 10/100Base-Tx Fast Ethernet port
    • Supports one EPON port for EPON site
    • Supports Gigabit Ethernet-PON IEEE 802.3ah compliance
    • Supports IEEE 802.3ah OAM function
    • Supports IEEE 802.3ah forward error correction
    • Supports 802.3z Gigabit Ethernet local-side interface
    • Supports bandwidth control
    • Supports up to 8 Logical Link IDs (LLID)
    • Supports 64 MAC address entries per Ethernet port
    • Supports 802.1p QoS
    • Supports 802.1Q VLAN
    • Supports 40 queues (20 upstream / 20 downstream)
    • Supports 1.25M Bytes packet buffer
    • Assurance of security for subscribers

—Encryption in the PON layer assures security between subscribers.

    • Supports each converter module media configured and monitored ability:
    • Supports port state enabled/disabled
    • Supports auto-negotiation/forced mode
    • Supports port speed and duplex mode
    • Supports flow control enabled/disabled
    • Supports wire speed packet forwarding ability as below:

—10Base : 14880 pp

—100Base: 148800 pps

—1000Base: 1413600 pps

(64Bytes up to 95% utilization)

(1518Bytes up to 97% utilization)

  • Supports EPON module per port basic counters for traffic raw data monitor of fiber and TP port. as below:
  • —Octets transferred—Total Frames transferred—Unicast Frames transferred

    —Broadcast Frames transferred

    —Multicast Frames transferred

    —CRC-32 Errors

    —Undersize Frames

    —Oversize Frames

    —Collisions

    —64 Octet Frames

    —65-127 Octet Frames

    —128-255 Octet Frames

    —256-511 Octet Frames

    —512-1023 Octet Frames

    —1024-1518 Octet Frames

    —1519+ Octet Frames

    —Frames dropped (queue overflow)

    —Pause Frames

  • Supports alarm log function
  • Supports counters for port traffic quality monitoring function
  • Supports IGMP snooping function
  • Supports max packet length: 1536 bytes
  • Supports firmware upgrade
  • Supports device Information (S/N, MAC, Model Name,….)
  • Supports per port basic LEDs for monitoring
  • Supports media type, connector, wavelength and distance information
  • RoHS Compliance
+ Specification

Product Specification

MODEL NAME ONU-E100C
Product Description 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE

LED Description

LED Color Function
PWR Green Lit when power is coming up
OLTLNK Green Lit when EPON port detects the signal from OLT.
LLID1-8 Green Off when LLID is used, or else is light.
UNI1-GbE LINK/ACT Green Lit when GbE port is linked.
Blink when GbE port is transmitting or receiving.
UNI1-GbE
10/100/1000		 Green/
Yellow		 Green lit when GbE port links on 1000Mbps speed.
Yellow lit when GbE port links on 100Mbps speed.
Off when GbE port links on 10Mbps or unlinks.
UNI1-GbE
FDX		 Yellow Lit when Full-Duplex is enabled
UNI2-FE
LNK/ACT		 Green Lit when FE port is linked.
Blink when FE port is transmitting or receiving.
UNI2-FE
10/100		 Green Lit when FE port links on 100Mbps speed.
Off when FE port links on 10Mbps or unlinks.
UNI1-FE
FDX		 Yellow Lit when Full-Duplex is enabled

Network Interface

Converter
TP Port		 10/100Base-TX:
– Auto-Negotiation
– Auto-MDIX
– flow control for Full-Duplex
– backpressure for Half-Duplex
1000Base-T:
– Auto-Negotiation Mode only
– Auto-MDIX only for Auto-Negotiation
– flow control for Full-Duplex only
Converter
Fiber Port		 ONU 1000Base-PX-U:
– Link partner must be OLT 1000Base-PX-U

TP Cable Limitations

Cat. 5 and up to 100m

Fiber Cable Limitations

ONU 1000PX
Single-Mode Fiber 9/125mm
Single-Mode transceiver
Output:1310nm 10 / 20Km
Note: Upstream=1310nm, Downstream=1490nm is the wavelength of EPON fiber transceiver

Standards

IEEE802.3 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3z/ab 1000Base-T,
IEEE802.3ah 1000Base-PX-U (EPON)

UTP Cable

Cat. 5 cable and up to 100m

Fiber Cable

1000Base-PX-U: 8.3/125, 8.7/125, 9/125 or 10/125mm Single-Mode

LED Indicators

PWR,
EPON LLID 1-8, OLTLNK,
UNI1-GbE LNK/ACT, 10/100/1000, FDX
UNI2-FE LNK/ACT, 10/100, FDX

Data Transfer Rate

Upstream: Max. Up to 950 Mbps
Downstream: Max. Up to 970 Mbps

TP Interface (UNI1-GbE and UNI2-FE):

10/100Base-TX:
NWay auto-negotiation
Auto-MDIX
Full/Half-Duplex

1000Base-T:
NWay auto-negotiation or force
Auto-MDIX(only for Auto mode)
Full-Duplex only

Fiber Interface

1000Base-PX-U (EPON):
Connector: SC/BiDi
Max. Cable Length: 20Km for 9/125u
Upstream (ONU TX) Wavelength: 1310nm
Downstream (ONU RX) Wavelength: 1490nm

Power Requirement

0.8A up @+5VDC

Power Consumption

3.5 W

Ambient Temperature

0° to 50°C

Humidity

5% to 90%

Dimensions

26.8(H) ´ 139(W) ´ 101.5(D) mm

Packing Information

Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
523x489x267 12 10.8 11.8
+ Ordering Information

Model

Model Dscription
ONU-E100BS3.S10 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 10km, 1310nm
ONU-E100BS3.S20 2-Port Gigabit Ethernet /Fast Ethernet to EPON ONU Converter CPE SC 20km, 1310nm
+ Download

Download

PDF Data sheet