Product Overview
XFGS-3814YA switch is a next-generation managed (1G/10G) SFP+ fiber and (1G/10G/25G) SFP28 Multi-Gigabit aggregation switch offering powerful L2 and basic L3 features with better functionality and usability.
XFGS-3814YA delivers 12 (1G/10G) SFP+ and 2 (1G/10G/25G) SFP28 ports and 1 RJ45 console port. XFGS-3814YA provides high HW performance for aggregation/access network applications.
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPF v2/v3 L3 dynamic routing
Benefits
This Multi-Gigabit switch delivers advanced functionality including L2 and L3 switch features. It also has enhanced security features such as IP source guard, Access Control List to guard your network from unwanted or unauthorized access.
It helps users to build on the market-leading price/performance with this Multi-Gig Ethernet switch, and provides secure, reliable for aggregation network deployments.
[/accordionitem]
[/cq_vc_accordion]
Product Specification
MODEL NAME | XFGS-3814YA |
---|---|
Product Description | 14 ports GbE/10G Fiber Aggregation Switch |
Port Configuration
10M/100M/1G RJ45 Port |
-- |
|
100M/1G/2.5G RJ45 Port |
-- |
|
100M/1G/10G RJ45 Port |
-- |
|
100M/1G/2.5G/5G/10G RJ45 Port |
-- |
|
100M/1G SFP Port |
-- |
|
GbE RJ45/SFP Combo Port |
-- |
|
1G/2.5G SFP Port |
-- |
|
1G/10G SFP+ Port |
12 |
|
SFP28/QSFP+ Combo Port |
-- |
|
1G/10G/25G SFP28 Port |
2 |
|
QSFP+ (40G) |
-- |
|
SFP56 (50G) |
-- |
|
USB |
-- |
|
Console Port |
RJ45 |
|
Total Ports |
14 |
HW Performance
Switching Bandwidth |
340Gbps |
|
Forwarding Performance |
252.876Mpps |
|
MAC Address |
32K |
|
Jumbo Frames |
10240 Bytes |
Environmental Specification
Operating Temperature |
0°C to 50°C |
|
Operating Humidity |
Up to 95% non-condensing |
|
Storage Temperature |
-20 to 70°C |
|
Storage Humidity |
Up to 95% non-condensing |
Mechanical Specification
Dimensions (H) x (W) x (D) mm |
44 x 442 x 300 |
|
Weight |
TBD |
|
FAN Less |
Power Source
AC Input |
100V-250V |
|
DC Input |
-- |
|
Dual Input |
-- |
Certifications
EN61000-4-5 (for RJ45 Port, Surge 6KV) |
-- |
|
Certifications |
CE/FCC/LVD Class A Others by Request |
L2 Switching
Spanning Tree |
IEEE802.1D (STP) |
|
IEEE802.1W (RSTP) |
||
IEEE802.1S (MSTP) | ||
VLAN |
802.1Q VLAN |
|
Port-Based |
||
VLAN Entries |
4K |
|
Private VLAN |
||
Voice VLAN |
||
Guest VLAN |
-- |
|
Q-in-Q |
||
802.1v Protocol VLAN |
||
MAC-Based VLAN |
||
IP Subnet-Based VLAN |
-- |
|
IEEE 802.3ad LACP |
Dynamic Trunk |
|
Static Trunk |
||
GARP/GVRP |
||
IGMP Snooping |
||
MLD Snooping |
||
Multicast VLAN Registration (MVR) |
-- |
L3 Features
Static Route |
||
DHCP Server |
||
Dynamic Routing |
QoS Features
Class of Service |
Port Based |
|
802.1p |
||
DSCP |
||
TCP/UDP Port |
||
Rate Limiting |
Ingress |
|
Egress |
||
Priority Queue Scheduling |
WRR |
|
Stri Priority |
||
Hardware Queues |
8 |
Security
ACLs |
L2/L3/L4 |
|
IPv6 Support |
||
Port Security (MAC-based) |
||
IP Source Guard |
||
Storm Control |
||
RADIUS Authentication 802.1x |
||
TACACS+ Authentication |
||
HTTPs and SSL (Secured Web) |
||
BPDU Guard |
-- |
|
STP Root Guard |
-- |
|
DHCP Snooping |
||
Loop Protection |
Management
DHCP |
Client |
|
Relay |
||
Option 66 |
||
Option 67 |
||
Option 82 |
||
Event/Error Log |
Syslog |
|
SMTP (RFC821) |
-- |
|
Management Access Filtering |
SNMP |
|
Web UI |
||
Telnet |
||
SSH |
||
PoE Management |
Scheduling |
-- |
Auto-Checking |
-- |
|
Power Delay |
-- |
|
Soft-Reboot PoE Non-stop |
-- |
|
SNMP (v1, v2c, v3) |
||
RMON (1,2,3 & 9 Groups) |
||
Software Upgrade |
||
Configuration Export/Import |
||
Port Mirroring |
||
LLDP (IEEE802.1AB) |
||
LLDP-MED (IEEE802.1AB) |
||
CDP Aware |
-- |
|
sFlow |
-- |
|
IPv6 Management |
||
NTP |
||
First Time Wizard |
-- |
Carrier Ethernet
SyncE |
-- |
|
1588v2 PTP |
||
1588v2 PTP (stratum3) |
||
OAM (IEEE802.3ah) |
-- |
|
CFM (IEEE802.1ag) |
-- |
|
PM (ITU-T Y.1731) |
-- |
|
ELPS (ITU-T G.8031) |
||
ERPS (ITU-T G.8032) |
||
Rapid-Ring |
-- |
|
RFC2544 |
-- |
|
Y.1564 |
-- |
XFGS-3814YA 10G Fiber Aggregation Switch
Port Configuration
Total Ports | SFP+ (1G/10G) | SFP28 (1G/10G/25G) | Console |
---|---|---|---|
14 | 12 | 2 | RJ45 |
Hardware Performance
Forwarding Capacity (Mpps) | Switching Capacity (Gbps) | Mac Table (K) | Jumbo Frames (Bytes) |
---|---|---|---|
252.876 | 340 | 32 | 10K |
Environmental Range
Operating Temperature | Storage Temperature | Altitude |
---|---|---|
0°C to 50°C | -20 to 70°C | <3000m |
Dimension, Weights, Humidity
Dimension (WxHxD) | Weight | Operating Humidity |
---|---|---|
Millimeter | Kilograms | |
442x 44x 300 | TBD | Up to 95%, non-condensing |
Power Supply / Voltage and Frequency
Power Input Voltage and Frequency |
---|
Hot-Swappable Dual AC PSUs / 100-250 VAC, 50~60 Hz |
Compliance
EMC and Safety |
---|
|
Software Features
Layer 2 Switching | |
---|---|
Spanning Tree Protocol (STP) |
|
Trunking | Link Aggregation Control Protocol (LACP) IEEE 802.3ad |
VLAN | Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
|
DHCP Relay |
|
IGMP v1/v2/v3 Snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups |
IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
IGMP Proxy | IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router |
MLD v1/v2 Snooping | Delivers IPv6 multicast packets only to the required receivers |
Layer 3 Switching | |
IPv4 Static routing | IPv4 Unicast: Static routing |
IPv6 Static routing | IPv6 Unicast: Static routing |
RIP v1/v2 | Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. |
OSPF v2/v3 | OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. |
Security | |
Secure Shell (SSH) | SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported |
Secure Sockets Layer (SSL) | SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch |
IEEE 802.1X |
|
Layer 2 Isolation Private VLAN Edge | PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks |
Port Security | Locks MAC Addresses to ports, and limits the number of learned MAC addresses |
IP Source Guard | Prevents illegal IP address from accessing to specific port in the switch |
RADIUS/ TACACS+ | Supports RADIUS and TACACS+ authentication. Switch as a client |
Storm control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
DHCP Snooping | A feature acts as a firewall between untrusted hosts and trusted DHCP servers |
ACLs | Supports up to 256 entries. Drop or rate limitation based on:
|
Quality of Service | |
Hardware Queue | Supports 8 hardware queues |
Scheduling |
|
Classification |
|
Rate Limiting |
|
Management | |
DHCP Server | Support DHCP server to assign IP to DHCP clients |
Remote Monitoring (RMON) | Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis |
Port Mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported |
UPnP | The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play |
s-Flow | The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats |
IEEE 802.1ab (LLDP) |
|
Web GUI Interface | Built-in switch configuration utility for browser-based device configuration |
CLI | For users to configure/manage switches in command line modes |
Dual Image | Independent primary and secondary images for backup while upgrading |
SNMP | SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
Firmware Upgrade |
|
Other Management |
|
IEEE 1588v2 PTP | Support IEEE 1588 v2 PTP (Precision Time Protocol) |
NTP | Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched |
ITU-T G.8031 | Supports ITU-T G.8031 Ethernet Linear Protection Switching |
ITU-T G.8032 | Supports ITU-T G.8032 Ethernet Ring Protection Switching |
Loop Detection | Supports Loop Detection and Protection |
XFGS-3800 Series
L2+ Managed GbE Fiber Aggregation Switches
XFGS-3800 Series L2+ Managed GbE Fiber Switches are next-generation managed (1G/10G) SFP+ fiber and (1G/10G/25G) SFP28 Multi-Gigabit aggregation switch offering powerful L2 and basic L3 features with better functionality and usability.
XFGS-3800 Series delivers 8/12 (1G/10G) Multi-Gig SFP+ or 2 (1G/10G/25G) SFP28 ports or 2 (100M/1G/2.5G/5G/10G) RJ45 ports and RJ45 Console port. XFGS-3800 Series provides high HW performance for aggregation/access network applications.
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPFv2/v3 L3 dynamic routing
Benefits
This Multi-Gigabit switch delivers advanced functionality including L2 and L3 switch features. It also has enhanced security features such as IP source guard, Access Control List to guard your network from unwanted or unauthorized access.
[/accordionitem][/cq_vc_accordion]
Specifications
Port Configuration
Model Name | Total Ports | SFP+ (1G/10G) | SFP28 (1G/10G/25G) | URJ45 (100M/1G/2.5G/5G/10G) | Console |
---|---|---|---|---|---|
XFGS-3810A | 10 | 8 | — | 2 | RJ45 |
XFGS-3814YA | 14 | 12 | 2 | — | RJ45 |
Hardware Performance
Model Name | Forwarding Capacity (Mpps) | Switching Capacity (Gbps) | Mac Table (K) | Jumbo Frames (Bytes) |
---|---|---|---|---|
XFGS-3810A | 148.809 | 200 | 32 | 10K |
XFGS-3814YA | 252.876 | 340 | 32 | 10K |
Environmental Range
Operating Temperature | Storage Temperature | Altitude |
---|---|---|
0°C to 50°C | -20 to 70°C | <3000m |
Dimension, Weights, Mounting
Model Name | Dimension (WxHxD) | Weight | Mounting Type |
---|---|---|---|
Millimeter | Kilograms | ||
XFGS-3810A | 220 x 44 x 243 | TBD | Up to 95%, non-condensing |
XFGS-3814YA | 442 x 44 x 300 |
Power Supply / Voltage and Frequency
Model Name | AC Input Voltage and Frequency |
---|---|
XFGS-3810A | Fixed single PSU / 100-250 VAC, 50~60 Hz |
XFGS-3814YA | Hot-Swappable Dual AC PSUs / 100-250 VAC, 50~60 Hz |
Compliance
EMC and Safety |
---|
|
Software Features
Layer 2 Switching | |
---|---|
Spanning Tree Protocol (STP) |
|
Trunking | Link Aggregation Control Protocol (LACP) IEEE 802.3ad |
VLAN | Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
|
DHCP Relay |
|
IGMP v1/v2/v3 Snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups |
IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
IGMP Proxy | IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router |
MLD v1/v2 Snooping | Delivers IPv6 multicast packets only to the required receivers |
Layer 3 Switching | |
IPv4 Static routing | IPv4 Unicast: Static routing |
IPv6 Static routing | IPv6 Unicast: Static routing |
RIP v1/v2 | Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. |
OSPF v2/v3 | OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. |
Security | |
Secure Shell (SSH) | SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported |
Secure Sockets Layer (SSL) | SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch |
IEEE 802.1X |
|
Layer 2 Isolation Private VLAN Edge | PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks |
Port Security | Locks MAC addresses to ports, and limits the number of learned MAC address |
IP Source Guard | Prevents illegal IP address from accessing to specific port in the switch |
RADIUS/ TACACS+ | Supports RADIUS and TACACS+ authentication. Switch as a client |
Storm Control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
DHCP Snooping | A feature acts as a firewall between untrusted hosts and trusted DHCP servers |
ACLs | Supports up to 256 entries. Drop or rate limitation based on:
|
Quality of Service | |
Hardware Queue | Supports 8 hardware queues |
Scheduling |
|
Classification |
|
Rate Limiting |
|
Management | |
DHCP Server | Support DHCP server to assign IP to DHCP clients |
Remote Monitoring (RMON) | Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis |
Port Mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. |
UPnP | The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play |
s-Flow | The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats |
IEEE 802.1ab (LLDP) |
|
Web GUI Interface | Built-in switch configuration utility for browser-based device configuration |
CLI | For users to configure/manage switches in command line modes |
Dual Image | Independent primary and secondary images for backup while upgrading |
SNMP | SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
Firmware Upgrade |
|
Other Management |
|
Synchronization | |
IEEE 1588v2 PTP | Support IEEE 1588 v2 PTP (Precision Time Protocol) |
NTP | Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched |
Loop Protection | |
ITU-T G.8031 | Supports ITU-T G.8031 Ethernet Linear Protection Switching |
ITU-T G.8032 | Supports ITU-T G.8032 Ethernet Ring Protection Switching |
Loop Detection | Supports Loop Detection and Protection |
Download
Product Specification
Product Datasheet
Series Product Datasheet
Quick Installation Guide