PSXS-3810ATS (720W)
Product Overview
PSXS-3810ATS switch is next-generation managed (100M/1G/2.5G/5G/10G) Multi-gigabit PoE++ switch offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features.
PSXS-3810ATS delivers 8 (100M/1G/2.5G/5G/10G Multi-Gig) RJ45 and 2 (1G/10G) SFP+ ports and RJ45 Console port. PSXS-3810ATS provides high HW performance for aggregation/access network applications.
PSXS-3810ATS supports 8 PoE++ (PoE output max. 90W per port). This switch provides high HW performance and environment flexibility for SMBs and Enterprises.
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPF v2/v3 L3 dynamic routing
- PoE Port configuration and scheduling
- 802.3af/802.3at/802.3bt high power PoE++ standard
Benefits
Feature-Rich Ethernet Switch for High Bandwidth Aggregation Applications
The switch delivers advanced functionality in this Multi-Gig Ethernet switch including L2 and L3 switch features, etc. It also enhanced security features such as IP source guard, Access Control List guard your network from unwanted or unauthorized access.
It helps users to build on the market-leading price/performance with Multi-Gig Ethernet switch, and provide secure, reliable for aggregation network deployments.
Exceptional Precision with IEEE 1588v2
The switch performs IEEE1588v2 PTP function, which is implemented in the hardware architecture to assure low latency and high time accuracy – which is critical for delay-sensitive financial and mobile applications.
ITU-T G.8032 (ERPS)
Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032 Recommendation to provide sub-50ms protection and fast switching recovery for Ethernet traffic in a ring topology, and at the same time ensuring that there are no loops formed at the Ethernet layer.
These features contribute to significant reduction in operational expenditures and allows for troubleshooting without expensive truck rolls.
Product Specification
| MODEL NAME | PSXS-3810ATS |
|---|---|
| Product Description | Multi-gigabit 10G PoE++ Switch |
Port Configuration
10M/100M/1G RJ45 Port |
-- |
|
100M/1G/2.5G RJ45 Port |
-- |
|
100M/1G/10G RJ45 Port |
-- |
|
100M/1G/2.5G/5G/10G RJ45 Port |
8 |
|
100M/1G SFP Port |
-- |
|
GbE RJ45/SFP Combo Port |
-- |
|
1G/2.5G SFP Port |
-- |
|
1G/10G SFP+ Port |
-- |
|
SFP28/QSFP+ Combo Port |
-- |
|
1G/10G/25G SFP28 Port |
2 |
|
QSFP+ (40G) |
-- |
|
SFP56 (50G) |
-- |
|
USB |
-- |
|
Console Port |
RJ45 |
|
Total Ports |
10 |
|
PoE Function
IEEE802.3at (PoE+ 30W) |
|
|
IEEE802.3af (PoE 15.4W) |
|
|
UPoE(60W) |
|
|
PoE++ 90W |
|
|
PoE Port |
8 |
|
Available PoE Power |
720W |
|
HW Performance
Switching Bandwidth |
200Gbps |
|
Forwarding Performance |
148.809Mbps |
|
MAC Address |
32K |
|
Jumbo Frames |
10240 Bytes |
|
Environmental Specification
Operating Temperature |
0°C to 40°C |
|
Operating Humidity |
10% to 90%, non-condensing |
|
Storage Temperature |
-20 to 70°C |
|
Storage Humidity |
10% to 90%, non-condensing |
|
Mechanical Specification
Dimensions (H) x (W) x (D) mm |
44 x 442 x 260 |
|
Weight |
TBD |
|
FAN Less |
N |
|
Power Source
AC Input |
100V-240V |
|
DC Input |
-- |
|
Dual Input |
-- |
|
Certifications
EN61000-4-5 (for RJ45 Port, Surge 6KV) |
-- |
|
Certifications |
CE/FCC/LVD Class A Others by Request |
|
L2 Switching
Spanning Tree |
IEEE802.1D (STP) |
|
IEEE802.1W (RSTP) |
|
|
IEEE802.1S (MSTP) | |
|
VLAN |
802.1Q VLAN |
|
Port-Based |
|
|
VLAN Entries |
4K |
|
Private VLAN |
|
|
Voice VLAN |
|
|
Guest VLAN |
-- |
|
Q-in-Q |
|
|
802.1v Protocol VLAN |
-- |
|
MAC-Based VLAN |
|
|
IP Subnet-Based VLAN |
-- |
|
IEEE 802.3ad LACP |
Dynamic Trunk |
|
Static Trunk |
|
|
GARP/GVRP |
|
|
IGMP Snooping |
|
|
MLD Snooping |
|
|
Multicast VLAN Registration (MVR) |
-- |
|
L3 Features
Static Route |
|
|
DHCP Server |
|
|
Dynamic Routing |
|
|
QoS Features
Class of Service |
Port Based |
|
802.1p |
|
|
DSCP |
|
|
TCP/UDP Port |
|
|
Rate Limiting |
Ingress |
|
Egress |
|
|
Priority Queue Scheduling |
WRR |
|
Stri Priority |
|
|
Hardware Queues |
8 |
|
Security
ACLs |
L2/L3/L4 |
|
IPv6 Support |
|
|
Port Security (MAC-based) |
|
|
IP Source Guard |
|
|
Storm Control |
|
|
RADIUS Authentication 802.1x |
|
|
TACACS+ Authentication |
|
|
HTTPs and SSL (Secured Web) |
|
|
BPDU Guard |
-- |
|
STP Root Guard |
-- |
|
DHCP Snooping |
|
|
Loop Protection |
|
|
Management
DHCP |
Client |
|
Relay |
|
|
Option 66 |
|
|
Option 67 |
|
|
Option 82 |
|
|
Event/Error Log |
Syslog |
|
SMTP (RFC821) |
-- |
|
Management Access Filtering |
SNMP |
|
Web UI |
|
|
Telnet |
|
|
SSH |
|
|
PoE Management |
Scheduling |
|
Auto-Checking |
|
|
Power Delay |
|
|
Soft-Reboot PoE Non-stop |
-- |
|
SNMP (v1, v2c, v3) |
|
|
RMON (1,2,3 & 9 Groups) |
|
|
Software Upgrade |
|
|
Configuration Export/Import |
|
|
Port Mirroring |
|
|
LLDP (IEEE802.1AB) |
|
|
LLDP-MED (IEEE802.1AB) |
|
|
CDP Aware |
-- |
|
sFlow |
-- |
|
IPv6 Management |
|
|
NTP |
|
|
First Time Wizard |
-- |
|
Carrier Ethernet
SyncE |
-- |
|
1588v2 PTP |
|
|
1588v2 PTP (stratum3) |
|
|
OAM (IEEE802.3ah) |
-- |
|
CFM (IEEE802.1ag) |
-- |
|
PM (ITU-T Y.1731) |
-- |
|
ELPS (ITU-T G.8031) |
|
|
ERPS (ITU-T G.8032) |
|
|
Rapid-Ring |
-- |
|
RFC2544 |
-- |
|
Y.1564 |
-- |
|
OpenFlow
Version |
-- |
|
Hybrid Switch |
-- |
|
Classification Mechanism |
-- |
|
| Pipeline Traversal | OpenFlow pipeline |
-- |
Traditional pipeline |
-- |
|
Entry Table |
-- |
|
Flow Table Stage |
-- |
|
| Entry Capability | Operation |
-- |
Hit Flag |
-- |
|
Metadata Match |
-- |
|
| Group Table | Group Entries |
-- |
Action Buckets |
-- |
|
Meter Table |
-- |
|
Counter |
-- |
|
Device Management System
Device Management |
Topology View |
-- |
Floor View |
-- |
|
Map View |
-- |
|
Dashboard |
-- |
|
Traffic Monitoring |
-- |
|
Cable Diagnostics |
-- |
Others
Power Backup with Battery Charge |
-- |
|
OOB MGMT Port |
-- |
|
DC Power Socket |
-- |
|
PSXS-3810ATS Multi-gigabit 10G PoE++ Switch
Port Configuration
| Total Ports | RJ45 (100M/1G/2.5G/5G/10G) | SFP+ (1G/10G) | SFP28 (1G/10G/25G) | Console |
|---|---|---|---|---|
| 10 | 8 | 2 | — | RJ45 |
Hardware Performance
| Forwarding Capacity | Switching Capacity | Mac Table | Jumbo Frames |
|---|---|---|---|
| 148.809Mbps | 200Gbps | 32K | 10K Bytes |
Environmental Range
| Operating Temperature | Storage Temperature | Altitude |
|---|---|---|
| 0°C to 40°C | -20 to 70°C | <3000m |
Dimension, Weights, Humidity
| Dimension (WxHxD) | Weight | Operating Humidity |
|---|---|---|
| Millimeter | Kilograms | |
| 442x44x260 | TBD | 10% to 90%, non-condensing |
Power Supply / Voltage and Frequency
| Power Input Voltage and Frequency |
|---|
| AC Input: 100-240 VAC, 50~60 Hz |
PoE Power Capacity
| Available PoE Power | Number of Ports That Support PoE(80.3af 15.4W), PoE+(802.3at 30.0W), PoE++ (802.3bt Type-3 60W & Type-4 90W) |
|---|---|
| 720W | Each of port 1 – 8 support PoE/ PoE+/PoE++ within available PoE Power |
Compliance
| EMC and Safety |
|---|
|
Software Features
| Layer 2 Switching | |
|---|---|
| Spanning Tree Protocol (STP) |
|
| Trunking | Link Aggregation Control Protocol (LACP) IEEE 802.3ad |
| VLAN | Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
|
| DHCP Relay |
|
| IGMP v1/v2/v3 Snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups |
| IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| IGMP Proxy | IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router |
| MLD v1/v2 Snooping | Delivers IPv6 multicast packets only to the required receivers |
| Layer 3 Switching | |
| IPv4 Static routing | IPv4 Unicast: Static routing |
| IPv6 Static routing | IPv6 Unicast: Static routing |
| RIP v1/v2 | Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. |
| OSPF v2/v3 | OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. |
| Security | |
| Secure Shell (SSH) | SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported |
| Secure Sockets Layer (SSL) | SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch |
| IEEE 802.1X |
|
| Layer 2 Isolation Private VLAN Edge | PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks |
| Port Security | Locks MAC Addresses to ports, and limits the number of learned MAC addresses |
| IP Source Guard | Prevents illegal IP address from accessing to specific port in the switch |
| RADIUS/ TACACS+ | Supports RADIUS and TACACS+ authentication. Switch as a client |
| Storm control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
| DHCP Snooping | A feature acts as a firewall between untrusted hosts and trusted DHCP servers |
| ACLs | Supports up to 256 entries. Drop or rate limitation based on:
|
| Quality of Service | |
| Hardware Queue | Supports 8 hardware queues |
| Scheduling |
|
| Classification |
|
| Rate Limiting |
|
| Management | |
| DHCP Server | Support DHCP server to assign IP to DHCP clients |
| Remote Monitoring (RMON) | Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis |
| Port Mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported |
| UPnP | The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play |
| s-Flow | The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats |
| IEEE 802.1ab (LLDP) |
|
| Web GUI Interface | Built-in switch configuration utility for browser-based device configuration |
| CLI | For users to configure/manage switches in command line modes |
| Dual Image | Independent primary and secondary images for backup while upgrading |
| SNMP | SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Firmware Upgrade |
|
| Other Management |
|
| NTP | Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched |
| HW Monitoring | Temperature Detection and Alarm |
| HW Watchdog | Supported to resume operation from CPU hang up |
| Loop Protection | |
| ITU-T G.8031 | Supports ITU-T G.8031 Ethernet Linear Protection Switching |
| ITU-T G.8032 | Supports ITU-T G.8032 Ethernet Ring Protection Switching |
| Loop Detection | Supports Loop Detection and Protection |
| Power over Ethernet (PoE) | |
| Port Configuration | Supports per port PoE configuration function |
| PoE Scheduling | Supports per port PoE scheduling to turn on/off the PoE devices (PDs). |
| Auto-checking | Check the link status of PDs. Reboot PDs if there is no responses |
| Power Delay | The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs |
| Clock function | |
| Sync-E | Support for ZL30772 and ZLS30380 advanced servo integration |
| IEEE 1588v2 PTP | Support IEEE 1588 v2 PTP (Precision Time Protocol) |
| G.8265.1/ G.8275.1/G.8275.2 | Support G.8265.1/8575.1/8275.2 profile Timing characteristics of Telecom Boundary Clocks, Class B |
PSXS/XS-3800 Series Multi-gigabit 10G Switches
The PSXS-3800 series are the next-generation managed (100M/1G/2.5G/5G/10G) Multi-gigabit with (1G/10G or 25G) fiber uplink Ethernet switches offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features.
The PSXS/XS-3800 series consists of 2 non-PoE models which are XS-3812YAS, and XS-3810AS and 2 PoE++ models which are PSXS-3812YATS, and PSXS-3810ATS (support 802.3at/af/bt, and total up to 900W and 720W ports). The series not only provides high HW performance for aggregation/access network applications but also environment flexibility for SMBs and Enterprises
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPFv2/v3 L3 dynamic routing
- PoE Port configuration and scheduling
- 802.3af/802.3at/802.3bt high power PoE++ standard
Benefits
Feature-Rich Ethernet Switch for High Bandwidth Aggregation Applications
The switch delivers advanced functionality in this Multi-Gig Ethernet switch including L2 and L3 switch features, etc. It also enhanced security features such as IP source guard, Access Control List guard your network from unwanted or unauthorized access.
It helps users to build on the market-leading price/performance with Multi-Gig Ethernet switch, and provide secure, reliable for aggregation network deployments.
Exceptional Precision with IEEE 1588v2
The switch performs IEEE1588v2 PTP function, which is implemented in the hardware architecture to assure low latency and high time accuracy – which is critical for delay-sensitive financial and mobile applications.
ITU-T G.8032 (ERPS)
Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032 Recommendation to provide sub-50ms protection and fast switching recovery for Ethernet traffic in a ring topology, and at the same time ensuring that there are no loops formed at the Ethernet layer.
These features contribute to significant reduction in operational expenditures and allows for troubleshooting without expensive truck rolls.
Specifications
Port Configuration
| Model Name | Total Ports | RJ45 (100M/1G/2.5G/5G/10G) | SFP+ (1G/10G) | SFP28 (1G/10G/25G) | Console |
|---|---|---|---|---|---|
| PSXS-3812YATS | 12 | 10 | — | 2 | RJ45 |
| PSXS-3810ATS | 10 | 8 | 2 | — | RJ45 |
| XS-3812YAS | 12 | 10 | — | 2 | RJ45 |
| XS-3810AS | 10 | 8 | 2 | — | RJ45 |
Hardware Performance
| Model Name | Forwarding Capacity | Switching Capacity | Mac Table | Jumbo Frames |
|---|---|---|---|---|
| PSXS-3812YATS | 595.238Mbps | 300Gbps | 32K | 10K Bytes |
| PSXS-3810ATS | 148.809Mbps | 200Gbps | 32K | 10K Bytes |
| XS-3812YAS | 595.238Mbps | 300Gbps | 32K | 10K Bytes |
| XS-3810AS | 148.809Mbps | 200Gbps | 32K | 10K Bytes |
Environmental Range
| Operating Temperature | Storage Temperature | Altitude |
|---|---|---|
| 0°C to 40°C | -20 to 70°C | <3000m |
Dimension, Weights, Humidity
| Dimension (WxHxD) | Weight | Operating Humidity |
|---|---|---|
| Millimeter | Kilograms | |
| 442x44x260 | TBD | Up to 95%, non-condensing |
Power Supply / Voltage and Frequency
| Power Input Voltage and Frequency |
|---|
| AC Input: 100-240 VAC, 50~60 Hz |
PoE Power Capacity
| Model Name | Available PoE Power | Number of Ports That Support PoE(80.3af 15.4W),PoE+(802.3at 30.0W), PoE++ (802.3bt Type-3 60W & Type-4 90W) |
|---|---|---|
| PSXS-3812YATS | 900W | Each of port 1 – 10 support PoE/ PoE+/PoE++ within available PoE Power |
| PSXS-3810ATS | 720W | Each of port 1 – 8 support PoE/ PoE+/PoE++ within available PoE Power |
Compliance
| EMC and Safety | |
|---|---|
| |
Software Features
| Layer 2 Switching | |
|---|---|
| Spanning Tree Protocol (STP) |
|
| Trunking | Link Aggregation Control Protocol (LACP) IEEE 802.3ad |
| VLAN | Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
|
| DHCP Relay |
|
| IGMP v1/v2/v3 Snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups |
| IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| IGMP Proxy | IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router |
| MLD v1/v2 Snooping | Delivers IPv6 multicast packets only to the required receivers |
| Layer 3 Switching | |
| IPv4 Static routing | IPv4 Unicast: Static routing |
| IPv6 Static routing | IPv6 Unicast: Static routing |
| RIP v1/v2 | Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. |
| OSPF v2/v3 | OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. |
| Security | |
| Secure Shell (SSH) | SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported |
| Secure Sockets Layer (SSL) | SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch |
| IEEE 802.1X |
|
| Layer 2 Isolation Private VLAN Edge | PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks |
| Port Security | Locks MAC addresses to ports, and limits the number of learned MAC address |
| IP Source Guard | Prevents illegal IP address from accessing to specific port in the switch |
| RADIUS/ TACACS+ | Supports RADIUS and TACACS+ authentication. Switch as a client |
| Storm Control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
| DHCP Snooping | A feature acts as a firewall between untrusted hosts and trusted DHCP servers |
| ACLs | Supports up to 256 entries. Drop or rate limitation based on:
|
| Quality of Service | |
| Hardware Queue | Supports 8 hardware queues |
| Scheduling |
|
| Classification |
|
| Rate Limiting |
|
| Management | |
| DHCP Server | Support DHCP server to assign IP to DHCP clients |
| Remote Monitoring | Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis |
| Port Mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. |
| UPnP | The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play |
| s-Flow | The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats |
| IEEE 802.1ab (LLDP) |
|
| Web GUI Interface | Built-in switch configuration utility for browser-based device configuration |
| CLI | For users to configure/manage switches in command line modes |
| Dual Image | Independent primary and secondary images for backup while upgrading |
| SNMP | SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Firmware Upgrade |
|
| Other Management |
|
| NTP | Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched |
| HW Monitoring | Temperature Detection and Alarm |
| HW Watchdog | Supported to resume operation from CPU hang up |
| Loop Protection | |
| ITU-T G.8031 | Supports ITU-T G.8031 Ethernet Linear Protection Switching |
| ITU-T G.8032 | Supports ITU-T G.8032 Ethernet Ring Protection Switching |
| Loop Detection | Supports Loop Detection and Protection |
| Power over Ethernet (PoE) | |
| Port Configuration | Supports per port PoE configuration function |
| PoE Scheduling | Supports per port PoE scheduling to turn on/off the PoE devices (PDs). |
| Auto-checking | Check the link status of PDs. Reboot PDs if there is no responses |
| Power Delay | The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs |
| Clock function | |
| Sync-E | Support for ZL30772 and ZLS30380 advanced servo integration |
| IEEE 1588v2 PTP | Support IEEE 1588 v2 PTP (Precision Time Protocol) |
| G.8265.1/ G.8275.1/G.8275.2 | Support G.8265.1/8575.1/8275.2 profile Timing characteristics of Telecom Boundary Clocks, Class B |
Download
Product Specification
Product Datasheet
Series Product Datasheet
Quick Installation Guide
- + Overview
-
Product Overview
PSXS-3810ATS switch is next-generation managed (100M/1G/2.5G/5G/10G) Multi-gigabit PoE++ switch offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features.
PSXS-3810ATS delivers 8 (100M/1G/2.5G/5G/10G Multi-Gig) RJ45 and 2 (1G/10G) SFP+ ports and RJ45 Console port. PSXS-3810ATS provides high HW performance for aggregation/access network applications.
PSXS-3810ATS supports 8 PoE++ (PoE output max. 90W per port). This switch provides high HW performance and environment flexibility for SMBs and Enterprises.
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPF v2/v3 L3 dynamic routing
- PoE Port configuration and scheduling
- 802.3af/802.3at/802.3bt high power PoE++ standard
Benefits
Feature-Rich Ethernet Switch for High Bandwidth Aggregation Applications
The switch delivers advanced functionality in this Multi-Gig Ethernet switch including L2 and L3 switch features, etc. It also enhanced security features such as IP source guard, Access Control List guard your network from unwanted or unauthorized access.
It helps users to build on the market-leading price/performance with Multi-Gig Ethernet switch, and provide secure, reliable for aggregation network deployments.
Exceptional Precision with IEEE 1588v2
The switch performs IEEE1588v2 PTP function, which is implemented in the hardware architecture to assure low latency and high time accuracy – which is critical for delay-sensitive financial and mobile applications.
ITU-T G.8032 (ERPS)
Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032 Recommendation to provide sub-50ms protection and fast switching recovery for Ethernet traffic in a ring topology, and at the same time ensuring that there are no loops formed at the Ethernet layer.
These features contribute to significant reduction in operational expenditures and allows for troubleshooting without expensive truck rolls.
- + Specification
-
Product Specification
MODEL NAME PSXS-3810ATS Product Description Multi-gigabit 10G PoE++ Switch Port Configuration
10M/100M/1G RJ45 Port--100M/1G/2.5G RJ45 Port--100M/1G/10G RJ45 Port--100M/1G/2.5G/5G/10G RJ45 Port8100M/1G SFP Port--GbE RJ45/SFP Combo Port--1G/2.5G SFP Port--1G/10G SFP+ Port--SFP28/QSFP+ Combo Port--1G/10G/25G SFP28 Port2QSFP+ (40G)--SFP56 (50G)--USB--Console PortRJ45Total Ports10PoE Function
IEEE802.3at (PoE+ 30W)
IEEE802.3af (PoE 15.4W)UPoE(60W)PoE++ 90WPoE Port8Available PoE Power720WHW Performance
Switching Bandwidth200GbpsForwarding Performance148.809MbpsMAC Address32KJumbo Frames10240 BytesEnvironmental Specification
Operating Temperature0°C to 40°COperating Humidity10% to 90%, non-condensingStorage Temperature-20 to 70°CStorage Humidity10% to 90%, non-condensingMechanical Specification
Dimensions (H) x (W) x (D) mm44 x 442 x 260WeightTBDFAN LessNPower Source
AC Input100V-240VDC Input--Dual Input--Certifications
EN61000-4-5 (for RJ45 Port, Surge 6KV)--CertificationsCE/FCC/LVD Class A
Others by RequestL2 Switching
Spanning TreeIEEE802.1D (STP)IEEE802.1W (RSTP)IEEE802.1S (MSTP)VLAN802.1Q VLANPort-BasedVLAN Entries4KPrivate VLANVoice VLANGuest VLAN--Q-in-Q802.1v Protocol VLAN--MAC-Based VLANIP Subnet-Based VLAN--IEEE 802.3ad LACPDynamic TrunkStatic TrunkGARP/GVRPIGMP SnoopingMLD SnoopingMulticast VLAN Registration (MVR)--L3 Features
Static RouteDHCP ServerDynamic RoutingQoS Features
Class of ServicePort Based802.1pDSCPTCP/UDP PortRate LimitingIngressEgressPriority Queue SchedulingWRRStri PriorityHardware Queues8Security
ACLsL2/L3/L4IPv6 SupportPort Security (MAC-based)IP Source GuardStorm ControlRADIUS Authentication 802.1xTACACS+ AuthenticationHTTPs and SSL (Secured Web)BPDU Guard--STP Root Guard--DHCP SnoopingLoop ProtectionManagement
DHCPClientRelayOption 66Option 67Option 82Event/Error LogSyslogSMTP (RFC821)--Management Access FilteringSNMPWeb UITelnetSSHPoE ManagementSchedulingAuto-CheckingPower DelaySoft-Reboot PoE Non-stop--SNMP (v1, v2c, v3)RMON (1,2,3 & 9 Groups)Software UpgradeConfiguration Export/ImportPort MirroringLLDP (IEEE802.1AB)LLDP-MED (IEEE802.1AB)CDP Aware--sFlow--IPv6 ManagementNTPFirst Time Wizard--Carrier Ethernet
SyncE--1588v2 PTP1588v2 PTP (stratum3)OAM (IEEE802.3ah)--CFM (IEEE802.1ag)--PM (ITU-T Y.1731)--ELPS (ITU-T G.8031)ERPS (ITU-T G.8032)Rapid-Ring--RFC2544--Y.1564--OpenFlow
Version--Hybrid Switch--Classification Mechanism--Pipeline Traversal OpenFlow pipeline--Traditional pipeline--Entry Table--Flow Table Stage--Entry Capability Operation--Hit Flag--Metadata Match--Group Table Group Entries--Action Buckets--Meter Table--Counter--Device Management System
Device ManagementTopology View--Floor View--Map View--Dashboard--Traffic Monitoring--Cable Diagnostics--Others
Power Backup with Battery Charge--OOB MGMT Port--DC Power Socket-- - + Datasheet
-
PSXS-3810ATS Multi-gigabit 10G PoE++ Switch
Port Configuration
Total Ports RJ45
(100M/1G/2.5G/5G/10G)SFP+
(1G/10G)SFP28
(1G/10G/25G)Console 10 8 2 — RJ45 Hardware Performance
Forwarding Capacity Switching Capacity Mac Table Jumbo Frames 148.809Mbps 200Gbps 32K 10K Bytes Environmental Range
Operating Temperature Storage Temperature Altitude 0°C to 40°C -20 to 70°C <3000m Dimension, Weights, Humidity
Dimension (WxHxD) Weight Operating Humidity Millimeter Kilograms 442x44x260 TBD 10% to 90%, non-condensing Power Supply / Voltage and Frequency
Power Input Voltage and Frequency AC Input: 100-240 VAC, 50~60 Hz PoE Power Capacity
Available PoE Power Number of Ports That Support PoE(80.3af 15.4W),
PoE+(802.3at 30.0W), PoE++ (802.3bt Type-3 60W & Type-4 90W)720W Each of port 1 – 8 support PoE/ PoE+/PoE++ within available PoE Power Compliance
EMC and Safety - SHALL comply with European Directives for CE marking (LVD with EN 62368-1)
- SHALL comply with FCC Part 15 Class A
- Other by Request
Software Features
Layer 2 Switching Spanning Tree
Protocol (STP)- Standard Spanning Tree 802.1d
- Rapid Spanning Tree (RSTP) 802.1w
- Multiple Spanning Tree (MSTP) 802.1s
Trunking Link Aggregation Control Protocol (LACP) IEEE 802.3ad VLAN Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN
- 802.1Q tag-based VLAN
- MAC-based VLAN
- Management VLAN
- Private VLAN Edge (PVE)
- Q-in-Q (double tag) VLAN
- Voice VLAN
- GARP VLAN Registration Protocol (GVRP)
DHCP Relay - Relay of DHCP traffic to DHCP server in different VLAN.
- Works with DHCP Option 82
IGMP v1/v2/v3
SnoopingIGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP Proxy IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router MLD v1/v2
SnoopingDelivers IPv6 multicast packets only to the required receivers Layer 3 Switching IPv4 Static routing IPv4 Unicast: Static routing IPv6 Static routing IPv6 Unicast: Static routing RIP v1/v2 Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. OSPF v2/v3 OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. Security Secure Shell (SSH) SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported Secure Sockets
Layer (SSL)SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch IEEE 802.1X - IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
- Supports IGMP-RADIUS based 802.1X
- Dynamic VLAN assignment
Layer 2 Isolation
Private VLAN EdgePVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks Port Security Locks MAC Addresses to ports, and limits the number of learned MAC addresses IP Source Guard Prevents illegal IP address from accessing to specific port in the switch RADIUS/ TACACS+ Supports RADIUS and TACACS+ authentication. Switch as a client Storm control Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port DHCP Snooping A feature acts as a firewall between untrusted hosts and trusted DHCP servers ACLs Supports up to 256 entries. Drop or rate limitation based on:
- Source and destination MAC, VLAN ID or IP address, port
- Differentiated services code point (DSCP) / IP precedence
- TCP/ UDP source and destination ports
- 802.1p priority
- Ethernet type
- Internet Control Message Protocol (ICMP) packets
- TCP flag
Quality of Service Hardware Queue Supports 8 hardware queues Scheduling - Strict priority and weighted round-robin (WRR)
- Queue assignment based on DSCP and class of service
Classification - Port based
- 802.1p VLAN priority based
- IPv4/IPv6 precedence / DSCP based
- Differentiated Services (DiffServ)
- Classification and re-marking ACLs
Rate Limiting - Ingress policer
- Egress shaping and rate control
- Per port
Management DHCP Server Support DHCP server to assign IP to DHCP clients Remote Monitoring
(RMON)Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis Port Mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported UPnP The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play s-Flow The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats IEEE 802.1ab (LLDP) - Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
- Support LLDP-MED extensions
Web GUI Interface Built-in switch configuration utility for browser-based device configuration CLI For users to configure/manage switches in command line modes Dual Image Independent primary and secondary images for backup while upgrading SNMP SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) Firmware Upgrade - Web browser upgrade (HTTP/ HTTPs) and TFTP
- Upgrade through console port as well
Other Management - HTTP/HTTPs; SSH
- DHCP Client/ DHCPv6 Client
- Cable Diagnostics
- Ping
- Syslog
- Telnet Client
- IPv6 Management
NTP Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched HW Monitoring Temperature Detection and Alarm HW Watchdog Supported to resume operation from CPU hang up Loop Protection ITU-T G.8031 Supports ITU-T G.8031 Ethernet Linear Protection Switching ITU-T G.8032 Supports ITU-T G.8032 Ethernet Ring Protection Switching Loop Detection Supports Loop Detection and Protection Power over Ethernet (PoE) Port Configuration Supports per port PoE configuration function PoE Scheduling Supports per port PoE scheduling to turn on/off the PoE devices (PDs). Auto-checking Check the link status of PDs. Reboot PDs if there is no responses Power Delay The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs Clock function Sync-E Support for ZL30772 and ZLS30380 advanced servo integration IEEE 1588v2 PTP Support IEEE 1588 v2 PTP (Precision Time Protocol) G.8265.1/
G.8275.1/G.8275.2Support G.8265.1/8575.1/8275.2 profile
Timing characteristics of Telecom Boundary Clocks, Class B - + Series Datasheet
-
PSXS/XS-3800 Series Multi-gigabit 10G Switches
The PSXS-3800 series are the next-generation managed (100M/1G/2.5G/5G/10G) Multi-gigabit with (1G/10G or 25G) fiber uplink Ethernet switches offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features.
The PSXS/XS-3800 series consists of 2 non-PoE models which are XS-3812YAS, and XS-3810AS and 2 PoE++ models which are PSXS-3812YATS, and PSXS-3810ATS (support 802.3at/af/bt, and total up to 900W and 720W ports). The series not only provides high HW performance for aggregation/access network applications but also environment flexibility for SMBs and Enterprises
Key Features
- Fully L2 features provide easier manageability, security and QoS
- IEEE 1588v2 PTP
- ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
- ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
- DHCP Server
- IPv4/IPv6 L3 static route
- RIP v1/v2 L3 dynamic routing
- OSPFv2/v3 L3 dynamic routing
- PoE Port configuration and scheduling
- 802.3af/802.3at/802.3bt high power PoE++ standard
Benefits
Feature-Rich Ethernet Switch for High Bandwidth Aggregation Applications
The switch delivers advanced functionality in this Multi-Gig Ethernet switch including L2 and L3 switch features, etc. It also enhanced security features such as IP source guard, Access Control List guard your network from unwanted or unauthorized access.
It helps users to build on the market-leading price/performance with Multi-Gig Ethernet switch, and provide secure, reliable for aggregation network deployments.
Exceptional Precision with IEEE 1588v2
The switch performs IEEE1588v2 PTP function, which is implemented in the hardware architecture to assure low latency and high time accuracy – which is critical for delay-sensitive financial and mobile applications.
ITU-T G.8032 (ERPS)
Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032 Recommendation to provide sub-50ms protection and fast switching recovery for Ethernet traffic in a ring topology, and at the same time ensuring that there are no loops formed at the Ethernet layer.
These features contribute to significant reduction in operational expenditures and allows for troubleshooting without expensive truck rolls.
Specifications
Port Configuration
Model Name Total Ports RJ45 (100M/1G/2.5G/5G/10G) SFP+ (1G/10G) SFP28 (1G/10G/25G) Console PSXS-3812YATS 12 10 — 2 RJ45 PSXS-3810ATS 10 8 2 — RJ45 XS-3812YAS 12 10 — 2 RJ45 XS-3810AS 10 8 2 — RJ45 Hardware Performance
Model Name Forwarding Capacity Switching Capacity Mac Table Jumbo Frames PSXS-3812YATS 595.238Mbps 300Gbps 32K 10K Bytes PSXS-3810ATS 148.809Mbps 200Gbps 32K 10K Bytes XS-3812YAS 595.238Mbps 300Gbps 32K 10K Bytes XS-3810AS 148.809Mbps 200Gbps 32K 10K Bytes Environmental Range
Operating Temperature Storage Temperature Altitude 0°C to 40°C -20 to 70°C <3000m Dimension, Weights, Humidity
Dimension (WxHxD) Weight Operating Humidity Millimeter Kilograms 442x44x260 TBD Up to 95%, non-condensing Power Supply / Voltage and Frequency
Power Input Voltage and Frequency AC Input: 100-240 VAC, 50~60 Hz PoE Power Capacity
Model Name Available PoE Power Number of Ports That Support PoE(80.3af 15.4W),PoE+(802.3at 30.0W), PoE++ (802.3bt Type-3 60W & Type-4 90W) PSXS-3812YATS 900W Each of port 1 – 10 support PoE/ PoE+/PoE++ within available PoE Power PSXS-3810ATS 720W Each of port 1 – 8 support PoE/ PoE+/PoE++ within available PoE Power Compliance
EMC and Safety - SHALL comply with European Directives for CE marking (LVD with EN 62368-1)
- SHALL comply with FCC Part 15 Class A
- Other by Request
Software Features
Layer 2 Switching Spanning Tree
Protocol (STP)- Standard Spanning Tree 802.1d
- Rapid Spanning Tree (RSTP) 802.1w
- Multiple Spanning Tree (MSTP) 802.1s
Trunking Link Aggregation Control Protocol (LACP) IEEE 802.3ad VLAN Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN
- 802.1Q tag-based VLAN
- MAC-based VLAN
- Management VLAN
- Private VLAN Edge (PVE)
- Q-in-Q (double tag) VLAN
- Voice VLAN
- GARP VLAN Registration Protocol (GVRP)
DHCP Relay - Relay of DHCP traffic to DHCP server in different VLAN.
- Works with DHCP Option 82
IGMP v1/v2/v3 Snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP Proxy IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router MLD v1/v2 Snooping Delivers IPv6 multicast packets only to the required receivers Layer 3 Switching IPv4 Static routing IPv4 Unicast: Static routing IPv6 Static routing IPv6 Unicast: Static routing RIP v1/v2 Routing Information Protocol (RIP) protocol are the intra-domain (interior) routing protocol which is based on distance vector routing and it is used inside an autonomous system. OSPF v2/v3 OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System’s topology. From this database, a routing table is calculated by constructing a shortest-path tree. Security Secure Shell (SSH) SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported Secure Sockets
Layer (SSL)SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch IEEE 802.1X - IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions
- Supports IGMP-RADIUS based 802.1X
- Dynamic VLAN assignment
Layer 2 Isolation
Private VLAN EdgePVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks Port Security Locks MAC addresses to ports, and limits the number of learned MAC address IP Source Guard Prevents illegal IP address from accessing to specific port in the switch RADIUS/ TACACS+ Supports RADIUS and TACACS+ authentication. Switch as a client Storm Control Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port DHCP Snooping A feature acts as a firewall between untrusted hosts and trusted DHCP servers ACLs Supports up to 256 entries. Drop or rate limitation based on:
- Source and destination MAC, VLAN ID or IP address, protocol, port,
- Differentiated services code point (DSCP) / IP precedence
- TCP/ UDP source and destination ports
- 802.1p priority
- Ethernet type
- Internet Control Message Protocol (ICMP) packets
- TCP flag
Quality of Service Hardware Queue Supports 8 hardware queues Scheduling - Strict priority and weighted round-robin (WRR)
- Queue assignment based on DSCP and class of service
Classification - Port based
- 802.1p VLAN priority based
- IPv4/IPv6 precedence / DSCP based
- Differentiated Services (DiffServ)
- Classification and re-marking ACLs
Rate Limiting - Ingress policer
- Egress shaping and rate control
- Per port
Management DHCP Server Support DHCP server to assign IP to DHCP clients Remote Monitoring (RMON) Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis Port Mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. UPnP The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play s-Flow The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats IEEE 802.1ab (LLDP) - Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
- Support LLDP-MED extensions
Web GUI Interface Built-in switch configuration utility for browser-based device configuration CLI For users to configure/manage switches in command line modes Dual Image Independent primary and secondary images for backup while upgrading SNMP SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) Firmware Upgrade - Web browser upgrade (HTTP/ HTTPs) and TFTP
- Upgrade through console port as well
Other Management - HTTP/HTTPs; SSH
- DHCP Client/ DHCPv6 Client
- Cable Diagnostics
- Ping
- Syslog
- Telnet Client
- IPv6 Management
NTP Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched HW Monitoring Temperature Detection and Alarm HW Watchdog Supported to resume operation from CPU hang up Loop Protection ITU-T G.8031 Supports ITU-T G.8031 Ethernet Linear Protection Switching ITU-T G.8032 Supports ITU-T G.8032 Ethernet Ring Protection Switching Loop Detection Supports Loop Detection and Protection Power over Ethernet (PoE) Port Configuration Supports per port PoE configuration function PoE Scheduling Supports per port PoE scheduling to turn on/off the PoE devices (PDs). Auto-checking Check the link status of PDs. Reboot PDs if there is no responses Power Delay The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs Clock function Sync-E Support for ZL30772 and ZLS30380 advanced servo integration IEEE 1588v2 PTP Support IEEE 1588 v2 PTP (Precision Time Protocol) G.8265.1/
G.8275.1/G.8275.2Support G.8265.1/8575.1/8275.2 profile
Timing characteristics of Telecom Boundary Clocks, Class B - + Download
-
Download
Product Specification
Product Datasheet
Series Product Datasheet
Quick Installation Guide