EM-C357C
Product Overview
EM-C357C complies with IEEE802.3/IEEE802.3u 10/100Mbps Fast Ethernet that supports two types of media, 10/100Base-TX and 100Base-FX, for network connection. LFP (Link Fault Pass Through) feature enhances the TP-Fiber Link integrity and conformity.
With modular slide-in design, it is flexible to install in the 19″ converter rack (up to 16 units) for use at a central wiring closet. The converter racks CR-16xx and CP-100/200 family are available for housing the converter modules.
Key Features
- 10/100Base-TX to 100Base-FX Fast Ethernet converter module
- Supports link fault pass through (LFP)
- RoHS Compliance
Product Specification
| MODEL NAME | EM-C357C |
|---|---|
| Product Description | 10/100Base-TX to 100Base-FX Converter Module |
Standard Compliance
IEEE 802.3u
10/100Base-TX
100Base-FX
Cable
UTP Cable : Cat. 5 cable and up to 100M
Fiber (M-M) : 50/125,62.5/125,100/140μm (Up to 2Km)
Fiber (S-M) : 8.3/125,8.7/125,9/125,100/125μm (Up to 120km)
Data Transfer Rate
100Mbps : 148,800 PPS
10Mbps : 14,880 PPS
LED Description
| LED | Funciton |
|---|---|
| PWR | Lit when +5V power is coming up |
| TP LNK | Lit when TP connection is good Blinks when TP data is present |
| TP 100 | Lit when TP speed is 100Mbps Off when TP speed is 10Mbps |
| FX LNK | Lit when fiber connection is good Blinks when fiber data is present |
| FX 100 | Lit for fiber 100Mbps operation |
| FDX/COL | Lit when full-duplex mode is active Off when half-duplex is active Blinks when collision is present |
Hardware Spec
| Feature | Detailed Description |
|---|---|
| Voltage | 2A@ + 5VDC |
| Ambient Temperature | 0°C ~ 50°C |
| Humidity | 5% ~ 90% |
| Dimensions | 125(L) x 64(H)mm |
| Emission | FCC Part 15 Class A, CE Mark |
Note：For connecting this device to Router, Bridge or Switch, please Refer to the corresponding device’s Technical Manua