ET-109RM
Product Overview
ET-109RST is an Ethernet IEEE802.3 media converter from 10Base-T to 10Base-FL. It is designed to address the situation where only 10Base-T port is available but requires 10Base-FL connectivity via ST connectors. Such high performance media converter can repeat and convert data signal running 10Base-FL cable up to 2 kilometers.
It is equipped with two fiber optic ST connectors (one for transmitting and the other for receiving) and one RJ-45 connector (DTE/MPR switch is used to select either workstation or Hub connection). Four LED indicators are built-in for easily diagnosing and monitoring the status of Power, UTP Link/Activity, Fiber Link/Activity, and Collision.
Key Features
- Support 10Base-T and 10Base-FL
- Standalone or composite application
- RoHS Compliance
Product Specification
| MODEL NAME | ET-109RM |
|---|---|
| Product Description | 10Base-T to 10Base-FL Media Convert |
Standards Compliance:
IEEE802.3 10Base-T and 10Base-FL
Connectors UTP Ports:
RJ-45 Jack
Fiber Port:
ST multi-mode connector TX/RX (ET-109RST)
ST single-mode connector TX/RX (ET-109RST.S10)
Cable:
UTP：Cat. 3 or 5 TP cable
Fiber：
-50/125, 62.5/125, or 100/140μm multi-mode
-8.3/125, 8.7/125, 9/125 or 10/125μm single-mode
Maximum wire Length:
UTP：100m
Fiber：2Km(multi-mode)
Data Transfer Rate:
10Mbps (Half duplex), 20Mbps (Full duplex)
Power Requirement:
1A@+5V DC
Ambient Temperature :
0~50°C
Humidity:
5%~90%
Dimensions:
26.2(H) x 70.3(W) x 94(D) mm
Certification:
FCC Part 15 Class A & CE Mark
Model
| Model | Dscription |
|---|---|
| ET-109RST | 10Base-T to 10Base-ST Media Converter |
| ET-109RST.S10 | 10Base-T to 10Base-SC Media Converter, ST single-mode, 10km 1310nm |