CLI - Rubytech

How to import your config file into the switch by console port ?

Install tftp client tool at your manage PC and designate directory is necessary .
Type command on CLI.

Switch# config-file Switch(config-file)# import 192.168.1.135 config.xml Saved 63007 bytes to server

How to export your configuration to a backup file by console port ?

Install tftp client tool at your manage PC and designate directory is necessary .
Type command on CLI.

Switch# config-file Switch(config-file)# export 192.168.1.135 config.xml Saved 63007 bytes to server

How to save configuration in backup area of flash by console port ?

Type command on CLI. Switch# save user <enter>

How to keep current configuration in flash by console port .(after the switch reboot , the switch will reload this configuration) ?

Type command on CLI. Switch# save start <enter>

How do I configure DHCP client on the switch by console port ?

Type command on CLI. Switch# ip <enter> Switch(ip)# dhcp enable <enter> Switch(ip)# show Configured Current --------------- --------------- DHCP Client : Enabled IP Address : 192.168.1.10 192.168.1.220 IP Mask : 255.255.255.0 255.255.255.0 IP Gateway : 192.168.1.252 192.168.1.123 VLAN ID : 1 1 DNS Server : 0.0.0.0 192.168.1.1 Proxy : Disabled

How do I reconfigure IP address.Subnet mask and Gateway thecn check them by consoel port ?

Type command on CLI. Switch# ip <enter> Switch(ip)#set 192.168.1.10 255.255.255.0 192.168.1.2542 <enter> Switch(ip)# show Configured Current --------------- --------------- DHCP Client : Disabled IP Address : 192.168.1.10 192.168.1.10 IP Mask : 255.255.255.0 255.255.255.0 IP Gateway : 192.168.1.252 192.168.1.252 VLAN ID : 1 1 DNS Server : 0.0.0.0 0.0.0.0 DNS Proxy : Disabled