FE-C622

SONET(OC-12) Multi-Mode to Single-Mode Fiber Mode Converter
OC-12 fiber network supports SONET or ATM protocol at 622Mbps bandwidth and speed. The fiber converter is used to convert multi-mode fiber to single-mode equiva-lent that extends the long span fiber connections easily and inexpensively. This media converter can be installed as a standalone unit or as a slide-in module to the 19″ converter rack (up to 10 units) for use at a central wiring closet.
Key Features
- Support 622M SONET OC-12 multi-mode to single-mode conversion
- Good for the applications to extend the network distance up to 15Km or 40Km
- Standalone or composite applications
- RoHS Compliance
Specifications
Standard compliance
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-X
IEEE 802.3x Flow Control and Back pressure
Data Transfer Rate
1000Mbps:148,8000 pps
Connector
RJ-45:1000Mbps
SC/LC:1000Mbps
Cable
TP: Cat.5 or Advance (Support distance up to 100m)
Fiber (M-M):50/125,62.5/125
Fiber (S-M):8.3/125,8.7/125,9/125,10/125μm
Flow Control
IEEE802.3x compliant for full-duplex
Hardware Specifications
Data Transfer Rate | Supports full-duplex, half-duplex mode |
LED Indicators | D for multi/single mode fiber port, POWER |
Power Requirement | 1A@5VDC |
Ambient Temperature | 0 to 50°C |
Humidity | 5% to 90% |
Dimensions | 6.2(H) x 70.3(W) x 94(D)mm |
FE-C622SC.S40 | 622Mbps (OC-12) M-M to S-M 40Km Converter |
Models: FE-C622
OC-12 622Mbps Fiber Converter | ||||
---|---|---|---|---|
Multi-mode | <-> | Single-mode | ||
SC | 500m | <-> | SC.S15:15Km | 1310nm |
SC | 500m | <-> | SC.S40:40Km | 1310nm |
Fiber Cable
Recommended | 62.5/125μm multi-mode |
Optional | 50/125, or 100/140μm multi-mode |
Recommended | 9/125μm single-mode |
Optional | 8.3/125, 8.7/125 or 10/125μm single-mode |
Ordering Information
FE-C622SC.S15 | 622Mbps (OC-12) M-M to S-M 15Km Converter |
FE-C622SC.S40 | 622Mbps (OC-12) M-M to S-M 40Km Converter |
Download
PDF Data sheet
- + Datasheet
-
SONET(OC-12) Multi-Mode to Single-Mode Fiber Mode Converter
OC-12 fiber network supports SONET or ATM protocol at 622Mbps bandwidth and speed. The fiber converter is used to convert multi-mode fiber to single-mode equiva-lent that extends the long span fiber connections easily and inexpensively. This media converter can be installed as a standalone unit or as a slide-in module to the 19″ converter rack (up to 10 units) for use at a central wiring closet.
Key Features
- Support 622M SONET OC-12 multi-mode to single-mode conversion
- Good for the applications to extend the network distance up to 15Km or 40Km
- Standalone or composite applications
- RoHS Compliance
Specifications
Standard compliance
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-X
IEEE 802.3x Flow Control and Back pressure
Data Transfer Rate
1000Mbps:148,8000 pps
Connector
RJ-45:1000Mbps
SC/LC:1000Mbps
Cable
TP: Cat.5 or Advance (Support distance up to 100m)
Fiber (M-M):50/125,62.5/125
Fiber (S-M):8.3/125,8.7/125,9/125,10/125μm
Flow Control
IEEE802.3x compliant for full-duplex
Hardware Specifications
Data Transfer Rate Supports full-duplex, half-duplex mode LED Indicators D for multi/single mode fiber port, POWER Power Requirement 1A@5VDC Ambient Temperature 0 to 50°C Humidity 5% to 90% Dimensions 6.2(H) x 70.3(W) x 94(D)mm FE-C622SC.S40 622Mbps (OC-12) M-M to S-M 40Km Converter Models: FE-C622
OC-12 622Mbps Fiber Converter Multi-mode <-> Single-mode SC 500m <-> SC.S15:15Km 1310nm SC 500m <-> SC.S40:40Km 1310nm Fiber Cable
Recommended 62.5/125μm multi-mode Optional 50/125, or 100/140μm multi-mode Recommended 9/125μm single-mode Optional 8.3/125, 8.7/125 or 10/125μm single-mode Ordering Information
FE-C622SC.S15 622Mbps (OC-12) M-M to S-M 15Km Converter FE-C622SC.S40 622Mbps (OC-12) M-M to S-M 40Km Converter - + Download
-
Download
PDF Data sheet