GM-C420
Product Overview
GM-C420 is a converter module designed to make conversion between 10/100/1000Base-T (RJ-45) / 1000Base-SX/LX(SFP) and 1000Base-SX/LX(SFP) Fiber Gigabit Ethernet. It can be used in Ruby Tech CR-2600 managed converter chassis. With web-based management and CLI (command line interface), the network administrator can logon the converter to monitor, configure and control the activity of each port. In addition, the converter implements bandwidth rating management capability via the intelligent software. The overall network management is enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth applications.
Key Features
- Supports each converter module media configured and monitored ability
- Supports wire speed packet forwarding ability
- Supports RMON counters for port traffic quality monitoring function
- Supports bandwidth rating per port ingress and egress rate limit 1000Mbps with 1Mbps granularity
- Supports Jumbo Frame max packet length: 9216 bytes
- Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
- Supports SFP for comprehensive types of fiber with different distances
- Supports two SFP for mode conversion application (Multi-mode to Single-Mode Fiber)
- Supports Q-in-Q double tagged frame transparent
- Supports module firmware upgrade
- Supports converter mode for LACP PDU forwarding
- Supports IEEE 802.3ah OAM Remote Failure Indication, Remote Monitoring, Remote Configuration and Loopback Testing
- Supports firmware upgrade by TFTP
- Supports hot-swap and auto reload configuration ability
- Supports IEEE 802.1p Priority
- Supports IEEE 802.1q Tag VLAN
- Supports QoS Classification based on TOS
- Supports LFP(Link Fault Pass Through) function
- RoHS Compliance
Product Specification
| MODEL NAME | GM-C420 |
|---|---|
| Product Description | 10/100/1000Base-T SFP to SFP |
LED Description:
| LED | Color | Funciton |
|---|---|---|
| PWR | Green | Lit when +5V power is coming up |
| Port 2 TP L/A | Green | Lit when port TP connection is good Blinks when any traffic is present |
| Port 2 SFP L/A | Green | Lit when port SFP fiber connection is good Blinks when any traffic is present |
| Port 2 SPD | Green Yellow | Green: Lit when 1000Base-TX is active Yellow: Lit when 100Base-TX is active |
| Port 2 FDX | Yellow | Lit when TP full-duplex mode is active or TP Collision happens in half-duplex mode |
| Port 1 SFP L/A | Green | Lit when port SFP fiber connection is good Blinks when any traffic is present |
Standards Compliance:
IEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX specification
IEEE 802.3ab 1000Base-T specification
IEEE 802.3z 1000Base-X specification
IEEE 802.3x full-duplex flow control specification
1000Base-SX/1000Base-LX Gigabit Ethernet Fiber specification
Network Interface:
10 /100Base-TX:
– Connectors: RJ-45
– Auto-Negotiation
– Auto-MDIX
– Transmission: Full/Half-Duplex
– Max. Cable Length: up to 100m
1000Base-T:
– Connectors: RJ-45
– Auto-Negotiation
– Auto-MDIX
– Transmission: Full-Duplex only
– Max. Cable Length: up to 100m
1000Base-SX (Multi mode):
– Connectors: LC (SFP)
– Auto-Negotiation
– Transmission: Full-Duplex only
– Max. Cable Length: 550m for 50/125μm
– Wavelength: 850nm
1000Base-LX (Single mode):
– Connectors: LC / Bidi-LC(SFP)
– Auto-Negotiation
– Transmission: Full-Duplex
– Max. Cable Length: 50Km for 9/125μm
– Wavelength: 1310nm or 1550nm
Emission and Safety Regulations:
Complies with FCC Part 15 Class A & CE Mark Approval
Warranty
IEEE802.3u 100Base-TX
IEEE802.3z/ab 1000Base-T
IEEE802.3ah 1000Base-PX-U (EPON)
UTP Cable:
Hardware: One Year
Software: 90-day
Power Requirement:
1.0 A@+5VDC
Consumption:
5W
Ambient Temperature:
0° to 50°C
Humidity:
5% to 90%
Dimensions:
135.6(L) X 66.8(W) mm
Remote Link Partner:
GM-C420+CP-E100:
10/100/1000Base-T/SFP to SFP Gigabit Ethernet Managed Converter for CPE Site
RC-2203
10/100/1000Base-T to 1000Base-X Managed GbE Media Converter