IPFC-130 is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3af Power Over Ethernet standard, this DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data received over a fiber optic link with –48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of IPFC-130, both end devices can be notified of a loss of fiber link.

1. 10/100Base-TX UTP to 100Base-FX fiber media conversion
2. IEEE802.3af PoE (Power over Ethernet) PSE compatible
3. Internal DC power supply
4. Over-current protection
5. Under-current detection
6. Minimum load sensing
7. Fault Protection Input
8. PSE MDI power enable/disable
9. LFP(Link Fault Pass-through) and far end fault
10. Choice of SC, ST, MTRJ, VF-45, BiDi or LC connectors for multimode and single mode
11. DIP switch to set configurations
12. RoHS Compliance
13. Support industrial -10~60℃ operating temperature (optional)
14. Alarm contact function
15. DIN-Rail, Wall mount and Desktop for easy installation