PDFC-130
10/100Base-TX to 100Base-FX PoE PSE FE Media Converter
PSFC-130 is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3af Power Over Ethernet standard, this AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data received over a fiber optic link with –48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSFC-130, both end devices can be notified of a loss of fiber link.
Key Features
- IEEE802.3af PoE (Power over Ethernet) PSE compatible
- 10/100Base-TX UTP to 100Base-FX fiber media conversion
- Internal AC/ DC power supply (Optional)
- Over-current protection
- Under-current detection
- Minimum load sensing
- Fault Protection Input
- PSE MDI power enable/disable
- LFP(Link Fault Pass-through) and far end fault
- Choice of SC, ST, MTRJ, VF-45, BiDi or LC connectors for multimode and single mode
- DIP switch to set configurations
- RoHS Compliance
Specifications
Standard Compliance
IEEE802.3u 10/100Base-TX, 100Base-FX
Connectors
10/100Base-TX: RJ-45
100Base-FX:MM SC, SM SC, MM MTRJ, MM VF-45, SM BiDi, MM LC,
Fiber Cable
50/125, 62.5/125 or 100/140mm multi-mode
8.3/125,8.7/125, 9/125 or 10/125mm single-mode
Data Transfer Rate
Speed Forwarding Rate
100Mbps 148,800 PPS
10Mbps 14,880 PPS
Flow Control
IEEE802.3xfor full-duplex
Back pressure flow control for half-duplex
LED Indicators
FX Link/Act, FX FDX/Col, TXLink/Act, TX 100, PSE Power Good, PSE Power Bad, Power
Hardware Spec
| Feature | Detailed Description |
|---|---|
| Power Requirement | 1A @ +5VDCfrom AC-DC Adapter 60mA@-48VDC from IEEE802.3af PSE or PoE injector |
| Operation Temperature | 0°C to 50°C |
| Humility | 5% to 90% |
| Dimensions | 26.2(H) x 70.3(W) x 94(D) mm |
| Certification | CC Part 15 Class A & CE Mark |
Packing Information
| Carton Dimensions (mm) | pcs/Carton | N.W (KG) | G.W (KG) |
|---|---|---|---|
| 602x447x348 | 40 | 20 | 21 |
Ordering Information
| PDFC-130SC | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Multi-Mode |
| PDFC-130ST | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, ST Multi-Mode |
| PDFC-130SC.S05 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 5km |
| PDFC-130SC.S20 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 20km |
| PDFC-130SC.S40 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 40km |
| PDFC-130SC.S60 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 60km |
| PDFC-130SC.S80 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 80km |
| PDFC-130SC.SA0 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 100km |
| PDFC-130BS3.S20 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 20km, 1310nm |
| PDFC-130BS5.S20 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 20km, 1550nm |
| PDFC-130BS3.S40 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 40km, 1310nm |
| PDFC-130BS5.S40 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 40km, 1550nm |
| PDFC-130BS3.S60 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 60km, 1310nm |
| PDFC-130BS5.S60 | 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 60km, 1550nm |
Download
PDF Data sheet
- + Datasheet
-
10/100Base-TX to 100Base-FX PoE PSE FE Media Converter
PSFC-130 is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3af Power Over Ethernet standard, this AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data received over a fiber optic link with –48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSFC-130, both end devices can be notified of a loss of fiber link.
Key Features
- IEEE802.3af PoE (Power over Ethernet) PSE compatible
- 10/100Base-TX UTP to 100Base-FX fiber media conversion
- Internal AC/ DC power supply (Optional)
- Over-current protection
- Under-current detection
- Minimum load sensing
- Fault Protection Input
- PSE MDI power enable/disable
- LFP(Link Fault Pass-through) and far end fault
- Choice of SC, ST, MTRJ, VF-45, BiDi or LC connectors for multimode and single mode
- DIP switch to set configurations
- RoHS Compliance
Specifications
Standard Compliance
IEEE802.3u 10/100Base-TX, 100Base-FX
Connectors
10/100Base-TX: RJ-45
100Base-FX:MM SC, SM SC, MM MTRJ, MM VF-45, SM BiDi, MM LC,Fiber Cable
50/125, 62.5/125 or 100/140mm multi-mode
8.3/125,8.7/125, 9/125 or 10/125mm single-modeData Transfer Rate
Speed Forwarding Rate
100Mbps 148,800 PPS
10Mbps 14,880 PPSFlow Control
IEEE802.3xfor full-duplex
Back pressure flow control for half-duplexLED Indicators
FX Link/Act, FX FDX/Col, TXLink/Act, TX 100, PSE Power Good, PSE Power Bad, Power
Hardware Spec
Feature Detailed Description Power Requirement 1A @ +5VDCfrom AC-DC Adapter
60mA@-48VDC from IEEE802.3af PSE or PoE injectorOperation Temperature 0°C to 50°C Humility 5% to 90% Dimensions 26.2(H) x 70.3(W) x 94(D) mm Certification CC Part 15 Class A & CE Mark Packing Information
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG) 602x447x348 40 20 21 Ordering Information
PDFC-130SC 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Multi-Mode PDFC-130ST 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, ST Multi-Mode PDFC-130SC.S05 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 5km PDFC-130SC.S20 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 20km PDFC-130SC.S40 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 40km PDFC-130SC.S60 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 60km PDFC-130SC.S80 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 80km PDFC-130SC.SA0 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, SC Single-Mode 100km PDFC-130BS3.S20 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 20km, 1310nm PDFC-130BS5.S20 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 20km, 1550nm PDFC-130BS3.S40 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 40km, 1310nm PDFC-130BS5.S40 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 40km, 1550nm PDFC-130BS3.S60 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 60km, 1310nm PDFC-130BS5.S60 10/100Base-TX to 100Base-FX PoE PD FE Media Converter with LFP, Bidi SC Single-Mode 60km, 1550nm - + Download
-
Download
PDF Data sheet