Frequently Asked Questions
How to use NTP server?
Please configure NTP server address in the System ---> Time ---> NTP page, and select “Use NTP Server” as clock source in the System ---> Time ---> Manual page.How to warm boot via CLI ?
Execute this command “reboot“ Switch# rebootI forget Username/Password for login? Is there any way to login the switch?
No, it only can press HW “RESET” button about 10 seconds to reset the switch to factory default.I have setup a syslog server, but I just want to receive some specific messages from the switch? How do I configure the switch?
You can configure Trap Event Severity and Syslog Level to achieve the purpose. Syslog Level: Emerg > Alert > Crit > Error > Warning > Notice > Info > Debug (ex. If you setup syslog level as “Info”, it means all Emerg, Alert, Crit, Error, Warning, Notice and Info related messages will send to syslog server.)I would like to build a VLAN trunk(single tag) environment, is there any suggestion for configuring VLAN’s port type and egress rule?
Suggest configure as below:- Port Type as “C-port” and Egress Rule as “Trunk” for Uplink port.
- Port Type as “C-port” and Egress Rule as “Access” for Downlink port(Here it means PCs or can’t recognize VLAN tag devices).